SAYPHA references stocked by ALLPARA for professional use, sourced direct and certified on every shipment.
Saypha Lips Lidocaine
Saypha Lips Lidocaine is a viscoelastic implant from Croma-Pharma in Austria, consisting of cross-linked hyaluronic acid obtained from Streptococcus equi bacteria, supplemented with lidocaine hydrochloride and phosphate buffered at pH 6,7 to 7,3. It contains 2,3% sodium hyaluronate, equivalent to 23 mg/mL, with lidocaine HCl 0,3%.
It is indicated to correct moderate to severe nasolabial folds and for lip augmentation, and must be injected into the mid to deep dermis or submucosa. Each box contains one pre-filled 1,0 mL syringe with two 27G 1/2 inch needles, three patient record labels and instructions for use including the international implant card. A 25G x 2 inch or 22G x 2 3/4 inch cannula may be affixed instead of the needle.
Key Benefits of Saypha Lips Lidocaine
- Indicated for lip augmentation and for correcting moderate to severe nasolabial folds
- Cross-linked sodium hyaluronate at 23 mg/mL, of non-animal origin from Streptococcus equi bacteria
- Contains lidocaine hydrochloride 0,3%, which reduces pain and discomfort during injection
- Can be delivered by needle or by cannula, a 25G x 2 inch or 22G x 2 3/4 inch
- Cross-linked to a mean degree of 0,5 to 1,0% with a typical particle size of approximately 316 micrometres
- BDDE cross-linking agent present at 2 ppm or less
- Supplied with two 27G 1/2 inch needles, three patient record labels and an international implant card
- Manufactured by Croma-Pharma in Austria
Indications and Professional Use
Main indications
- Lip augmentation, to make the lips fuller
- Moderate to severe nasolabial folds, the deep lines running from the edge of the nose to the outer corners of the mouth
- For adults aged 18 or older; not to be used in people under the age of 18
Professional use
Saypha Lips Lidocaine is intended for an appropriately trained healthcare professional who is qualified or accredited in accordance with national law, and is not intended to be used by lay persons. It is injected into the mid to deep dermis or submucosa, using the supplied 27G 1/2 inch needle or, where the practitioner prefers, a 25G x 2 inch or 22G x 2 3/4 inch cannula. For healthy adults the maximum total dose of lidocaine hydrochloride should not exceed 300 mg, or 4,5 mg per kg body weight, whichever is less, per session; where other forms of lidocaine are used concurrently, whether topical or injected, the maximum total dose must be considered. Patients should avoid strenuous exercise and exposure to extensive sun or heat in the first 48 hours after injection.
Treatment areas
- Lips, by submucosal injection
- Nasolabial folds, by mid to deep dermis injection
Patient profile
For adults 18 years of age or older, assessed as suitable by the treating practitioner. It must not be used in those who tend to develop hypertrophic scars, have pigment disorders or a susceptibility to keloid formation, since treatment may trigger these complications. It must not be used in those known to be hypersensitive to hyaluronic acid, gram-positive bacterial proteins, lidocaine hydrochloride or amide-type local anaesthetics, since treatment may trigger allergic reactions of varying severity. It must not be used in pregnant or breast-feeding women, or in individuals younger than 18 years of age.
How Saypha Lips Lidocaine Works
Saypha Lips Lidocaine works through cross-linked hyaluronic acid at 23 mg/mL, placed in the lip submucosa or the mid to deep dermis where it adds volume. The gel is cross-linked to a mean degree of 0,5 to 1,0% with a typical particle size of approximately 316 micrometres, and the BDDE cross-linking agent is present at 2 ppm or less.
The lidocaine hydrochloride at 0,3% is integrated into the implant in an ancillary role, to reduce pain and discomfort caused by the injection, which matters in the lip more than almost anywhere else. It does not change how the gel behaves in tissue.
Why Order From Allpara
Allpara offers genuine, verified SAYPHA products from vetted suppliers, with full batch-traceability and expert support. We serve clinics and aesthetic professionals with CE-certified products, fast EU-wide delivery from our EU warehouse, and competitive trade pricing. Our focus is your patients' safety, satisfaction and results - with dedicated after-sales support for your peace of mind.
Frequently Asked Questions
How does Saypha Lips Lidocaine differ from Saypha Filler Lidocaine?
Both carry 2,3% sodium hyaluronate with lidocaine 0,3% and share the same registered indication and placement, the mid to deep dermis or submucosa. Saypha Lips Lidocaine additionally documents a cannula option, a 25G x 2 inch or 22G x 2 3/4 inch cannula in place of the supplied needle.
Can Saypha Lips Lidocaine be injected with a cannula?
Yes. Two 27G 1/2 inch needles are supplied, and a 25G x 2 inch or 22G x 2 3/4 inch cannula may be affixed instead, following the same assembly steps.
Where can clinics buy Saypha Lips Lidocaine?
ALLPARA supplies Saypha Lips Lidocaine to licensed practitioners, clinics and distributors on a B2B account. Wholesale terms, stock position and batch expiry are released to registered professional buyers.
More from Croma-Pharma
POLYPHIL references stocked by ALLPARA for professional use, sourced direct and certified on every shipment.
POLYPHIL Products
View all 4Clinic alternatives
Pick up where you left off
Saypha Lips Lidocaine
Saypha Lips Lidocaine is a viscoelastic implant from Croma-Pharma in Austria, consisting of cross-linked hyaluronic acid obtained from Streptococcus equi bacteria, supplemented with lidocaine hydrochloride and phosphate buffered at pH 6,7 to 7,3. It contains 2,3% sodium hyaluronate, equivalent to 23 mg/mL, with lidocaine HCl 0,3%.
It is indicated to correct moderate to severe nasolabial folds and for lip augmentation, and must be injected into the mid to deep dermis or submucosa. Each box contains one pre-filled 1,0 mL syringe with two 27G 1/2 inch needles, three patient record labels and instructions for use including the international implant card. A 25G x 2 inch or 22G x 2 3/4 inch cannula may be affixed instead of the needle.
Key Benefits of Saypha Lips Lidocaine
- Indicated for lip augmentation and for correcting moderate to severe nasolabial folds
- Cross-linked sodium hyaluronate at 23 mg/mL, of non-animal origin from Streptococcus equi bacteria
- Contains lidocaine hydrochloride 0,3%, which reduces pain and discomfort during injection
- Can be delivered by needle or by cannula, a 25G x 2 inch or 22G x 2 3/4 inch
- Cross-linked to a mean degree of 0,5 to 1,0% with a typical particle size of approximately 316 micrometres
- BDDE cross-linking agent present at 2 ppm or less
- Supplied with two 27G 1/2 inch needles, three patient record labels and an international implant card
- Manufactured by Croma-Pharma in Austria
Indications and Professional Use
Main indications
- Lip augmentation, to make the lips fuller
- Moderate to severe nasolabial folds, the deep lines running from the edge of the nose to the outer corners of the mouth
- For adults aged 18 or older; not to be used in people under the age of 18
Professional use
Saypha Lips Lidocaine is intended for an appropriately trained healthcare professional who is qualified or accredited in accordance with national law, and is not intended to be used by lay persons. It is injected into the mid to deep dermis or submucosa, using the supplied 27G 1/2 inch needle or, where the practitioner prefers, a 25G x 2 inch or 22G x 2 3/4 inch cannula. For healthy adults the maximum total dose of lidocaine hydrochloride should not exceed 300 mg, or 4,5 mg per kg body weight, whichever is less, per session; where other forms of lidocaine are used concurrently, whether topical or injected, the maximum total dose must be considered. Patients should avoid strenuous exercise and exposure to extensive sun or heat in the first 48 hours after injection.
Treatment areas
- Lips, by submucosal injection
- Nasolabial folds, by mid to deep dermis injection
Patient profile
For adults 18 years of age or older, assessed as suitable by the treating practitioner. It must not be used in those who tend to develop hypertrophic scars, have pigment disorders or a susceptibility to keloid formation, since treatment may trigger these complications. It must not be used in those known to be hypersensitive to hyaluronic acid, gram-positive bacterial proteins, lidocaine hydrochloride or amide-type local anaesthetics, since treatment may trigger allergic reactions of varying severity. It must not be used in pregnant or breast-feeding women, or in individuals younger than 18 years of age.
How Saypha Lips Lidocaine Works
Saypha Lips Lidocaine works through cross-linked hyaluronic acid at 23 mg/mL, placed in the lip submucosa or the mid to deep dermis where it adds volume. The gel is cross-linked to a mean degree of 0,5 to 1,0% with a typical particle size of approximately 316 micrometres, and the BDDE cross-linking agent is present at 2 ppm or less.
The lidocaine hydrochloride at 0,3% is integrated into the implant in an ancillary role, to reduce pain and discomfort caused by the injection, which matters in the lip more than almost anywhere else. It does not change how the gel behaves in tissue.
Why Order From Allpara
Allpara offers genuine, verified SAYPHA products with full batch-traceability, CE-certified stock, fast EU-wide delivery and expert after-sales support.
Frequently Asked Questions
How does Saypha Lips Lidocaine differ from Saypha Filler Lidocaine?
Both carry 2,3% sodium hyaluronate with lidocaine 0,3% and share the same registered indication and placement, the mid to deep dermis or submucosa. Saypha Lips Lidocaine additionally documents a cannula option, a 25G x 2 inch or 22G x 2 3/4 inch cannula in place of the supplied needle.
Can Saypha Lips Lidocaine be injected with a cannula?
Yes. Two 27G 1/2 inch needles are supplied, and a 25G x 2 inch or 22G x 2 3/4 inch cannula may be affixed instead, following the same assembly steps.
Where can clinics buy Saypha Lips Lidocaine?
ALLPARA supplies Saypha Lips Lidocaine to licensed practitioners, clinics and distributors on a B2B account. Wholesale terms, stock position and batch expiry are released to registered professional buyers.