JUVÉDERM references stocked by ALLPARA for professional use, sourced direct and certified on every shipment.
Juvéderm Skinvive
Juvéderm Skinvive, formerly presented as Juvéderm Volite, is an intradermal microdroplet injectable that smooths the cheeks and increases dermal hydration.
SKINVIVE by Juvéderm is a sterile, pyrogen-free physiological solution of cross-linked hyaluronic acid of non-animal origin, presented in a graduated, pre-filled, disposable syringe. Each 1 mL contains hyaluronic acid gel 12.0 mg and lidocaine hydrochloride 3.0 mg in phosphate buffer at pH 7.2. Juvéderm Volite is now presented as SKINVIVE by Juvéderm: it is the same formulation under updated branding and packaging.
It is an injectable implant used for the treatment, by filling, of superficial cutaneous depressions such as fine lines, and for additional improvement of skin quality attributes such as hydration and elasticity. It is intended for intra-dermal injection by an authorised medical practitioner. Each box contains two 1 mL syringes with four single-use 32G 1/2 inch sterile needles, an instruction leaflet and a set of traceability labels.
ALLPARA supplies SKINVIVE by Juvéderm to clinics and licensed practitioners with batch-level traceability and documentation available on request. Wholesale pricing is available to registered professional buyers.
Key Benefits of Juvéderm Skinvive
- Injectable implant for superficial cutaneous depressions such as fine lines, and for improvement of skin quality attributes including hydration and elasticity
- Hyaluronic acid gel 12.0 mg with lidocaine hydrochloride 3.0 mg per mL, in phosphate buffer at pH 7.2
- Cross-linked hyaluronic acid of non-animal origin, sterile and pyrogen-free
- A skin quality treatment rather than a volumising filler, so it addresses hydration and surface texture instead of contour
- Supplied with 32G 1/2 inch needles, the finest gauge across these references, consistent with intra-dermal placement
- Contains lidocaine, so no separate anaesthetic is needed at the injection site
- Each box holds two 1 mL syringes with four single-use needles and traceability labels
- CE marked 0344, for professional use only
- Manufactured by Allergan in Annecy, France
Indications and Professional Use
Main indications
- Superficial cutaneous depressions such as fine lines, by intra-dermal injection
- Improvement of skin quality attributes such as hydration
- Improvement of skin quality attributes such as elasticity
Professional use
SKINVIVE by Juvéderm is an injectable medical device intended for intra-dermal injection by an authorised medical practitioner in accordance with local applicable regulation. It is for professional use only, is not for retail sale to consumers and never for self-administration. The technique and volume per site are selected by the treating practitioner. It must not be injected in the eyelids. It must not be injected into blood vessels, since intravascular injection may lead to embolisation, occlusion of the vessels, ischaemia or infarction, and it must not be overcorrected. SKINVIVE is a skin quality treatment and is not interchangeable with the deeper-placed volumising references in the range.
Treatment areas
- Intra-dermal injection by an authorised medical practitioner
Patient profile
For adult patients assessed as suitable by the treating practitioner. Selection, injected volume, plane and technique follow clinical assessment by the practitioner. The product must not be used in patients suffering from untreated epilepsy, patients who tend to develop hypertrophic scarring, patients with known hypersensitivity to hyaluronic acid or to gram-positive bacterial proteins, patients with known hypersensitivity to lidocaine or to amide-type local anaesthetics, patients suffering from porphyria, women who are pregnant or breastfeeding, or children. It must not be used in areas presenting cutaneous inflammatory or infectious processes such as acne or herpes.
How Juvéderm Skinvive Works
SKINVIVE by Juvéderm works through cross-linked hyaluronic acid of non-animal origin at 12.0 mg per mL, placed intra-dermally so that it fills superficial cutaneous depressions such as fine lines while improving skin quality attributes including hydration and elasticity. The hyaluronic acid is produced by Streptococcus type bacteria. The lidocaine hydrochloride at 3.0 mg per mL reduces the patient's pain during treatment.
Placement is what separates it from the rest of the range: intra-dermal injection with 32G needles, the finest gauge supplied across these references. It is a skin quality treatment rather than a volumiser, and is not a substitute for a deeper-placed reference.
Why Order From Allpara
Allpara offers genuine, verified JUVÉDERM products from vetted suppliers, with full batch-traceability and expert support. We serve clinics and aesthetic professionals with CE-certified products, fast EU-wide delivery from our EU warehouse, and competitive trade pricing. Our focus is your patients' safety, satisfaction and results - with dedicated after-sales support for your peace of mind.
Frequently Asked Questions
How does SKINVIVE differ from the rest of the Juvéderm range?
SKINVIVE is a skin quality treatment rather than a volumising filler. It is placed intra-dermally to fill superficial cutaneous depressions such as fine lines and to improve skin quality attributes including hydration and elasticity, whereas references such as Volbella, Volift and Volux are placed deeper to define, restore volume or contour. It is not a substitute for any of them.
Which needle is supplied with SKINVIVE?
Each box contains four single-use 32G 1/2 inch sterile needles, to be used only for injecting SKINVIVE. That is the finest gauge across these references, consistent with intra-dermal placement. The syringe contents are sterilised by moist heat and the needles by radiation.
How do clinics order SKINVIVE wholesale?
ALLPARA supplies SKINVIVE by Juvéderm to licensed practitioners, clinics and distributors under a B2B account. Wholesale terms, stock position and batch expiry are released to registered professional buyers on request.
More from Allergan
HARMONYCA references stocked by ALLPARA for professional use, sourced direct and certified on every shipment.
HARMONYCA Products
View all 1Clinic alternatives
Pick up where you left off
Juvéderm Skinvive
SKINVIVE by Juvéderm is a sterile, pyrogen-free physiological solution of cross-linked hyaluronic acid of non-animal origin, presented in a graduated, pre-filled, disposable syringe. Each 1 mL contains hyaluronic acid gel 12.0 mg and lidocaine hydrochloride 3.0 mg in phosphate buffer at pH 7.2. Juvéderm Volite is now presented as SKINVIVE by Juvéderm: it is the same formulation under updated branding and packaging.
It is an injectable implant used for the treatment, by filling, of superficial cutaneous depressions such as fine lines, and for additional improvement of skin quality attributes such as hydration and elasticity. It is intended for intra-dermal injection by an authorised medical practitioner. Each box contains two 1 mL syringes with four single-use 32G 1/2 inch sterile needles, an instruction leaflet and a set of traceability labels.
ALLPARA supplies SKINVIVE by Juvéderm to clinics and licensed practitioners with batch-level traceability and documentation available on request. Wholesale pricing is available to registered professional buyers.
Key Benefits of Juvéderm Skinvive
- Injectable implant for superficial cutaneous depressions such as fine lines, and for improvement of skin quality attributes including hydration and elasticity
- Hyaluronic acid gel 12.0 mg with lidocaine hydrochloride 3.0 mg per mL, in phosphate buffer at pH 7.2
- Cross-linked hyaluronic acid of non-animal origin, sterile and pyrogen-free
- A skin quality treatment rather than a volumising filler, so it addresses hydration and surface texture instead of contour
- Supplied with 32G 1/2 inch needles, the finest gauge across these references, consistent with intra-dermal placement
- Contains lidocaine, so no separate anaesthetic is needed at the injection site
- Each box holds two 1 mL syringes with four single-use needles and traceability labels
- CE marked 0344, for professional use only
- Manufactured by Allergan in Annecy, France
Indications and Professional Use
Main indications
- Superficial cutaneous depressions such as fine lines, by intra-dermal injection
- Improvement of skin quality attributes such as hydration
- Improvement of skin quality attributes such as elasticity
Professional use
SKINVIVE by Juvéderm is an injectable medical device intended for intra-dermal injection by an authorised medical practitioner in accordance with local applicable regulation. It is for professional use only, is not for retail sale to consumers and never for self-administration. The technique and volume per site are selected by the treating practitioner. It must not be injected in the eyelids. It must not be injected into blood vessels, since intravascular injection may lead to embolisation, occlusion of the vessels, ischaemia or infarction, and it must not be overcorrected. SKINVIVE is a skin quality treatment and is not interchangeable with the deeper-placed volumising references in the range.
Treatment areas
- Intra-dermal injection by an authorised medical practitioner
Patient profile
For adult patients assessed as suitable by the treating practitioner. Selection, injected volume, plane and technique follow clinical assessment by the practitioner. The product must not be used in patients suffering from untreated epilepsy, patients who tend to develop hypertrophic scarring, patients with known hypersensitivity to hyaluronic acid or to gram-positive bacterial proteins, patients with known hypersensitivity to lidocaine or to amide-type local anaesthetics, patients suffering from porphyria, women who are pregnant or breastfeeding, or children. It must not be used in areas presenting cutaneous inflammatory or infectious processes such as acne or herpes.
How Juvéderm Skinvive Works
SKINVIVE by Juvéderm works through cross-linked hyaluronic acid of non-animal origin at 12.0 mg per mL, placed intra-dermally so that it fills superficial cutaneous depressions such as fine lines while improving skin quality attributes including hydration and elasticity. The hyaluronic acid is produced by Streptococcus type bacteria. The lidocaine hydrochloride at 3.0 mg per mL reduces the patient's pain during treatment.
Placement is what separates it from the rest of the range: intra-dermal injection with 32G needles, the finest gauge supplied across these references. It is a skin quality treatment rather than a volumiser, and is not a substitute for a deeper-placed reference.
Why Order From Allpara
Allpara offers genuine, verified JUVÉDERM products with full batch-traceability, CE-certified stock, fast EU-wide delivery and expert after-sales support.
Frequently Asked Questions
How does SKINVIVE differ from the rest of the Juvéderm range?
SKINVIVE is a skin quality treatment rather than a volumising filler. It is placed intra-dermally to fill superficial cutaneous depressions such as fine lines and to improve skin quality attributes including hydration and elasticity, whereas references such as Volbella, Volift and Volux are placed deeper to define, restore volume or contour. It is not a substitute for any of them.
Which needle is supplied with SKINVIVE?
Each box contains four single-use 32G 1/2 inch sterile needles, to be used only for injecting SKINVIVE. That is the finest gauge across these references, consistent with intra-dermal placement. The syringe contents are sterilised by moist heat and the needles by radiation.
How do clinics order SKINVIVE wholesale?
ALLPARA supplies SKINVIVE by Juvéderm to licensed practitioners, clinics and distributors under a B2B account. Wholesale terms, stock position and batch expiry are released to registered professional buyers on request.