PERFECTHA references stocked by ALLPARA for professional use, sourced direct and certified on every shipment.
Perfectha Derm
Perfectha Derm is a cross-linked hyaluronic acid dermal filler manufactured in France by Sinclair France SAS, Dardilly, and indicated for medium facial lines and skin depressions. It reduces nasolabial folds and marionette lines, and addresses lip enhancement and scars.
Placement is in the superficial subcutaneous plane. At approximately 90,000 particles per mL, the filler has the second-smallest particles in the Perfectha range, with moderate volumising capacity. The hyaluronic acid is of non-animal origin at 20 mg/mL in phosphate-buffered saline, cross-linked with BDDE, which is non-detectable at under 2 ppm in the finished gel. Perfectha uses Sinclair's E-BRID Technology to slow enzymatic degradation, has been CE marked since 2007 under CE 2195, has a 2-year shelf life, and is reversible with hyaluronidase.
Key Benefits of Perfectha Derm
- For medium facial lines and skin depressions, including nasolabial folds and marionette lines
- Also indicated for lip enhancement and for scars
- Approximately 90,000 particles per mL, the second-smallest particles in the Perfectha range
- Cross-linked hyaluronic acid 20 mg/mL, non-animal origin
- Contains no anaesthetic
- In a study, 86% of patients were much improved or very much improved one week after treatment
- Excellent results remaining at 6 months in 57% of nasolabial folds and 45% of lips
- E-BRID Technology, for slower enzymatic degradation and longer-lasting results
- Supplied as a single 1.0 mL syringe with two 30G x 13 mm needles
- CE-marked medical device, CE 2195
Indications and Professional Use
Main indications
- Medium facial lines and skin depressions
- Nasolabial folds
- Marionette lines
- Lip enhancement
- Scars
Professional use
Perfectha Derm is a cross-linked hyaluronic acid dermal filler from Sinclair, for superficial subcutaneous placement in medium facial lines and skin depressions, and for lip enhancement and scars. At approximately 90,000 particles per mL it carries moderate volumising capacity and the second-smallest particles in the range, so it is positioned for line correction rather than structural volume. This reference contains no anaesthetic.
Treatment areas
- Nasolabial folds
- Marionette lines
- Lips
- Scars
Patient profile
Patient suitability must be determined by the treating practitioner following clinical assessment and according to the contraindications. Patients whose concern is superficial fine lines are better served by Perfectha Finelines; those seeking contour and volume by Perfectha Deep or Perfectha Subskin.
How Perfectha Derm Works
Perfectha Derm works through cross-linked hyaluronic acid of non-animal origin at 20 mg/mL in phosphate-buffered saline, placed in the superficial subcutaneous plane. At approximately 90,000 particles per mL it sits second in the range for particle size, above Finelines and below Deep, giving it a moderate volumising capacity suited to medium facial lines and depressions rather than to structural volume.
The gel is built with Sinclair's E-BRID Technology, which creates a higher number of covalent bonds to help minimise the effects of hyaluronidase and oxidation in the body, slowing enzymatic degradation. An added HA Polymer Solution Network forms a protective fluid environment around the microgel particles, further slowing degradation, and acts as a lubricant so the gel injects smoothly at low extrusion force.
Why Order From Allpara
Allpara offers genuine, verified PERFECTHA products from vetted suppliers, with full batch-traceability and expert support. We serve clinics and aesthetic professionals with CE-certified products, fast EU-wide delivery from our EU warehouse, and competitive trade pricing. Our focus is your patients' safety, satisfaction and results - with dedicated after-sales support for your peace of mind.
Frequently Asked Questions
What is in Perfectha Derm, and how deep is it placed?
Cross-linked hyaluronic acid of non-animal origin at 20 mg/mL in phosphate-buffered saline, at approximately 90,000 particles per mL. Placement is the superficial subcutaneous plane. It contains no anaesthetic.
How does Perfectha Derm differ from the other Perfectha variants?
By particle size, which is what differentiates the gels: the bigger the particles, the greater the volumising effect and the longer-lasting the result. Finelines is at around 180,000 particles per mL, then Derm at 90,000, Deep at 8,000, and Subskin at 2,000 with the highest volumising capacity.
Is Perfectha Derm reversible?
Yes. Hyaluronidase can be used in case of complications.
More from Sinclair
ELLANSÉ references stocked by ALLPARA for professional use, sourced direct and certified on every shipment.
ELLANSÉ Products
View all 2LANLUMA references stocked by ALLPARA for professional use, sourced direct and certified on every shipment.
LANLUMA Products
View all 2MAILI references stocked by ALLPARA for professional use, sourced direct and certified on every shipment.
MAILI Products
View all 4SILHOUETTE SOFT references stocked by ALLPARA for professional use, sourced direct and certified on every shipment.
SILHOUETTE SOFT Products
View all 2Clinic alternatives
Pick up where you left off
Perfectha Derm
Perfectha Derm is a cross-linked hyaluronic acid dermal filler manufactured in France by Sinclair France SAS, Dardilly, and indicated for medium facial lines and skin depressions. It reduces nasolabial folds and marionette lines, and addresses lip enhancement and scars.
Placement is in the superficial subcutaneous plane. At approximately 90,000 particles per mL, the filler has the second-smallest particles in the Perfectha range, with moderate volumising capacity. The hyaluronic acid is of non-animal origin at 20 mg/mL in phosphate-buffered saline, cross-linked with BDDE, which is non-detectable at under 2 ppm in the finished gel. Perfectha uses Sinclair's E-BRID Technology to slow enzymatic degradation, has been CE marked since 2007 under CE 2195, has a 2-year shelf life, and is reversible with hyaluronidase.
Key Benefits of Perfectha Derm
- For medium facial lines and skin depressions, including nasolabial folds and marionette lines
- Also indicated for lip enhancement and for scars
- Approximately 90,000 particles per mL, the second-smallest particles in the Perfectha range
- Cross-linked hyaluronic acid 20 mg/mL, non-animal origin
- Contains no anaesthetic
- In a study, 86% of patients were much improved or very much improved one week after treatment
- Excellent results remaining at 6 months in 57% of nasolabial folds and 45% of lips
- E-BRID Technology, for slower enzymatic degradation and longer-lasting results
- Supplied as a single 1.0 mL syringe with two 30G x 13 mm needles
- CE-marked medical device, CE 2195
Indications and Professional Use
Main indications
- Medium facial lines and skin depressions
- Nasolabial folds
- Marionette lines
- Lip enhancement
- Scars
Professional use
Perfectha Derm is a cross-linked hyaluronic acid dermal filler from Sinclair, for superficial subcutaneous placement in medium facial lines and skin depressions, and for lip enhancement and scars. At approximately 90,000 particles per mL it carries moderate volumising capacity and the second-smallest particles in the range, so it is positioned for line correction rather than structural volume. This reference contains no anaesthetic.
Treatment areas
- Nasolabial folds
- Marionette lines
- Lips
- Scars
Patient profile
Patient suitability must be determined by the treating practitioner following clinical assessment and according to the contraindications. Patients whose concern is superficial fine lines are better served by Perfectha Finelines; those seeking contour and volume by Perfectha Deep or Perfectha Subskin.
How Perfectha Derm Works
Perfectha Derm works through cross-linked hyaluronic acid of non-animal origin at 20 mg/mL in phosphate-buffered saline, placed in the superficial subcutaneous plane. At approximately 90,000 particles per mL it sits second in the range for particle size, above Finelines and below Deep, giving it a moderate volumising capacity suited to medium facial lines and depressions rather than to structural volume.
The gel is built with Sinclair's E-BRID Technology, which creates a higher number of covalent bonds to help minimise the effects of hyaluronidase and oxidation in the body, slowing enzymatic degradation. An added HA Polymer Solution Network forms a protective fluid environment around the microgel particles, further slowing degradation, and acts as a lubricant so the gel injects smoothly at low extrusion force.
Why Order From Allpara
Allpara offers genuine, verified PERFECTHA products with full batch-traceability, CE-certified stock, fast EU-wide delivery and expert after-sales support.
Frequently Asked Questions
What is in Perfectha Derm, and how deep is it placed?
Cross-linked hyaluronic acid of non-animal origin at 20 mg/mL in phosphate-buffered saline, at approximately 90,000 particles per mL. Placement is the superficial subcutaneous plane. It contains no anaesthetic.
How does Perfectha Derm differ from the other Perfectha variants?
By particle size, which is what differentiates the gels: the bigger the particles, the greater the volumising effect and the longer-lasting the result. Finelines is at around 180,000 particles per mL, then Derm at 90,000, Deep at 8,000, and Subskin at 2,000 with the highest volumising capacity.
Is Perfectha Derm reversible?
Yes. Hyaluronidase can be used in case of complications.