Wypełniacze skórne
PLURYAL pozycji w ofercie ALLPARA do użytku profesjonalnego, kupowanych bezpośrednio i z certyfikatem przy każdej wysyłce.
Oznakowanie CE
SKU 10988
Pluryal Biosculpture
Dostępny
Objętość
2 x 1,1 mL
Laboratorium
MD Skin solutions Laboratoires
Pochodzenie
Luksemburg
Wskazanie
Bioremodeling of sagging skin; restoration of small volume losses on face and hands
Obszary zabiegowe
Cena hurtowa i historia tylko dla zweryfikowanych
allpara zaopatruje licencjonowanych specjalistów. Zaloguj się lub załóż konto B2B, aby zobaczyć aktualne ceny, progi ilościowe i historię cen.
Pluryal Biosculpture is a class III injectable medical device and a Bio densifier in the Pluryal range, designed for the bioremodeling of sagging skin. It is suitable for professionals treating the face and the back of the hands, where it goes into the deep dermis or superficial hypodermis to restore facial volume and lift sagging skin while bio-stimulating the dermis for improved skin quality. Built on Matricyal 3D Technology, the product combines cross-linked hyaluronic acid at 25 mg/mL with 10% free hyaluronic acid embedded in the matrix and is intended for professional use only. It comes as 2 x 1.1 mL pre-filled syringes with 2 x 27G and 2 x 30G needles.
Najważniejsze zalety: Pluryal Biosculpture
- Bio-remodeler: restores facial volume by lifting and tightening sagging skin while bio-stimulating the dermis
- Matricyal 3D cross-linked hyaluronic acid, 25 mg/mL with 10% free HA released gradually
- Rejuvenates, moisturises, restructures and restores small volume losses
- Very low residual BDDE (< 0.1 ppm); biocompatible and bioresorptive
- Visible results from the first session, with ex-vivo evidence of increased dermal hyaluronic acid, collagen and fibronectin
Wskazania i zastosowanie profesjonalne
Główne wskazania
- Bioremodeling of sagging skin (middle and deep tissue layers)
- Fine lines and local hypovolumes
- Lip biosculpturing
- Acne scars
- Skin quality, hydration and dermal restructuring
Zastosowanie profesjonalne
For professional use only, by doctors trained in intradermal injection techniques. Pluryal Biosculpture is a class III injectable medical device (Matricyal 3D Technology) acting as a densifier for the bioremodeling of sagging skin, injected into the deep dermis or superficial hypodermis. Initial treatment: 3 sessions at 3-week intervals; maintenance: every 3-6 months. Injection techniques include the Double7Lift (cannula 18-22G / 70-90 mm), microdroplet / subdermal papules, the 5-point malar technique for skin laxity, and the fan pattern.
Obszary zabiegowe
- Face
- Lips
- Back of the hands
Profil pacjenta
Adults from around 35 years of age seeking a non-surgical treatment for sagging and flaccidity, restoration of skin quality and hydration, and natural-looking rejuvenation. Administered by a practitioner trained in intradermal injection.
Jak działa Pluryal Biosculpture
Pluryal Biosculpture is built on Matricyal 3D Technology: cross-linked hyaluronic acid at 25 mg/mL (high molecular weight 2 Million Da and medium 1 Million Da) layered with free low molecular weight hyaluronic acid (500 kDa, 10%) embedded in the matrix. The cross-linked HA restores volume and lifts sagging skin, while the free HA is released gradually and binds CD44 receptors to bio-stimulate the skin, promoting collagen synthesis and increasing hyaluronic acid and fibronectin. The result is simultaneous volume restoration and dermal bioremodeling, with residual BDDE kept below 0.1 ppm.
Dlaczego warto zamawiać w Allpara
Allpara oferuje oryginalne, sprawdzone produkty PLURYAL od zweryfikowanych dostawców, z pełną identyfikowalnością partii i wsparciem ekspertów. Obsługujemy kliniki i specjalistów medycyny estetycznej, oferując produkty z oznakowaniem CE, szybką dostawę na terenie całej UE z naszego magazynu w UE oraz konkurencyjne ceny hurtowe. Najważniejsze są dla nas bezpieczeństwo, satysfakcja i efekty Twoich pacjentów - z indywidualnym wsparciem posprzedażowym dla Twojego spokoju.
Najczęściej zadawane pytania
What is Pluryal Biosculpture used for?
Sagging of the middle and deep tissue layers, fine lines, local hypovolumes and acne scars, including lip biosculpturing, on the face and the back of the hands, while improving skin quality and hydration.
How is it different from a regular filler?
As a densifier it does more than fill: it lifts and tightens sagging skin while bio-stimulating the dermis, gradually releasing free hyaluronic acid that supports collagen and skin restructuring.
At what depth is it injected, and how often?
Into the deep dermis or superficial hypodermis. The initial treatment is 3 sessions at 3-week intervals, with maintenance every 3-6 months.
Więcej od MD Skin solutions Laboratoires
Biorewitalizacja
Mezoterapia
Alternatywy dla kliniki
/ Ostatnio oglądane
Kontynuuj przeglądanie
Pluryal Biosculpture
Dostępny
Oznakowanie CE
Pluryal Biosculpture is a class III injectable medical device and a Bio densifier in the Pluryal range, designed for the bioremodeling of sagging skin. It is suitable for professionals treating the face and the back of the hands, where it goes into the deep dermis or superficial hypodermis to restore facial volume and lift sagging skin while bio-stimulating the dermis for improved skin quality. Built on Matricyal 3D Technology, the product combines cross-linked hyaluronic acid at 25 mg/mL with 10% free hyaluronic acid embedded in the matrix and is intended for professional use only. It comes as 2 x 1.1 mL pre-filled syringes with 2 x 27G and 2 x 30G needles.
Najważniejsze zalety: Pluryal Biosculpture
- Bio-remodeler: restores facial volume by lifting and tightening sagging skin while bio-stimulating the dermis
- Matricyal 3D cross-linked hyaluronic acid, 25 mg/mL with 10% free HA released gradually
- Rejuvenates, moisturises, restructures and restores small volume losses
- Very low residual BDDE (< 0.1 ppm); biocompatible and bioresorptive
- Visible results from the first session, with ex-vivo evidence of increased dermal hyaluronic acid, collagen and fibronectin
Wskazania i zastosowanie profesjonalne
Główne wskazania
- Bioremodeling of sagging skin (middle and deep tissue layers)
- Fine lines and local hypovolumes
- Lip biosculpturing
- Acne scars
- Skin quality, hydration and dermal restructuring
Zastosowanie profesjonalne
For professional use only, by doctors trained in intradermal injection techniques. Pluryal Biosculpture is a class III injectable medical device (Matricyal 3D Technology) acting as a densifier for the bioremodeling of sagging skin, injected into the deep dermis or superficial hypodermis. Initial treatment: 3 sessions at 3-week intervals; maintenance: every 3-6 months. Injection techniques include the Double7Lift (cannula 18-22G / 70-90 mm), microdroplet / subdermal papules, the 5-point malar technique for skin laxity, and the fan pattern.
Obszary zabiegowe
- Face
- Lips
- Back of the hands
Profil pacjenta
Adults from around 35 years of age seeking a non-surgical treatment for sagging and flaccidity, restoration of skin quality and hydration, and natural-looking rejuvenation. Administered by a practitioner trained in intradermal injection.
Jak działa Pluryal Biosculpture
Pluryal Biosculpture is built on Matricyal 3D Technology: cross-linked hyaluronic acid at 25 mg/mL (high molecular weight 2 Million Da and medium 1 Million Da) layered with free low molecular weight hyaluronic acid (500 kDa, 10%) embedded in the matrix. The cross-linked HA restores volume and lifts sagging skin, while the free HA is released gradually and binds CD44 receptors to bio-stimulate the skin, promoting collagen synthesis and increasing hyaluronic acid and fibronectin. The result is simultaneous volume restoration and dermal bioremodeling, with residual BDDE kept below 0.1 ppm.
Dlaczego warto zamawiać w Allpara
Allpara oferuje oryginalne, sprawdzone produkty PLURYAL z pełną identyfikowalnością partii, produktami z oznakowaniem CE, szybką dostawą na terenie całej UE i fachowym wsparciem posprzedażowym.
Najczęściej zadawane pytania
What is Pluryal Biosculpture used for?
Sagging of the middle and deep tissue layers, fine lines, local hypovolumes and acne scars, including lip biosculpturing, on the face and the back of the hands, while improving skin quality and hydration.
How is it different from a regular filler?
As a densifier it does more than fill: it lifts and tightens sagging skin while bio-stimulating the dermis, gradually releasing free hyaluronic acid that supports collagen and skin restructuring.
At what depth is it injected, and how often?
Into the deep dermis or superficial hypodermis. The initial treatment is 3 sessions at 3-week intervals, with maintenance every 3-6 months.
Więcej od MD Skin solutions Laboratoires
Zobacz laboratorium →* Produkt do użytku profesjonalnego. Opakowanie może się różnić w zależności od partii lub rynku. Pełne zalecenia i przeciwwskazania znajdziesz w dołączonej instrukcji użycia (IFU).