Dermal Fillers
PLURYAL references stocked by ALLPARA for professional use, sourced direct and certified on every shipment.
CE Marked
SKU 10988
Pluryal Biosculpture
In stock
Volume
2 x 1,1 mL
Laboratory
MD Skin solutions Laboratoires
Origin
Luxemburg
Indication
Bioremodeling of sagging skin; restoration of small volume losses on face and hands
Treatment areas
Trade price and history are verified-only
allpara supplies licensed practitioners. Sign in or apply for a B2B account to see live pricing, volume tiers and price history.
Pluryal Biosculpture is a class III injectable medical device and a Bio densifier in the Pluryal range, designed for the bioremodeling of sagging skin. Built on Matricyal 3D Technology, it combines cross-linked hyaluronic acid at 25 mg/mL with 10% free hyaluronic acid embedded in the matrix, so it restores facial volume and lifts sagging skin while bio-stimulating the dermis for improved skin quality. It is injected into the deep dermis or superficial hypodermis of the face and the back of the hands, and is supplied as 2 x 1.1 mL pre-filled syringes with 2 x 27G and 2 x 30G needles, for professional use only.
Key Benefits of Pluryal Biosculpture
- Bio-remodeler: restores facial volume by lifting and tightening sagging skin while bio-stimulating the dermis
- Matricyal 3D cross-linked hyaluronic acid, 25 mg/mL with 10% free HA released gradually
- Rejuvenates, moisturises, restructures and restores small volume losses
- Very low residual BDDE (< 0.1 ppm); biocompatible and bioresorptive
- Visible results from the first session, with ex-vivo evidence of increased dermal hyaluronic acid, collagen and fibronectin
Indications and Professional Use
Main indications
- Bioremodeling of sagging skin (middle and deep tissue layers)
- Fine lines and local hypovolumes
- Lip biosculpturing
- Acne scars
- Skin quality, hydration and dermal restructuring
Professional use
For professional use only, by doctors trained in intradermal injection techniques. Pluryal Biosculpture is a class III injectable medical device (Matricyal 3D Technology) acting as a densifier for the bioremodeling of sagging skin, injected into the deep dermis or superficial hypodermis. Initial treatment: 3 sessions at 3-week intervals; maintenance: every 3–6 months. Injection techniques include the Double7Lift (cannula 18-22G / 70-90 mm), microdroplet / subdermal papules, the 5-point malar technique for skin laxity, and the fan pattern.
Treatment areas
- Face
- Lips
- Back of the hands
Patient profile
Adults from around 35 years of age seeking a non-surgical treatment for sagging and flaccidity, restoration of skin quality and hydration, and natural-looking rejuvenation. Administered by a practitioner trained in intradermal injection.
How Pluryal Biosculpture Works
Pluryal Biosculpture is built on Matricyal 3D Technology: cross-linked hyaluronic acid at 25 mg/mL (high molecular weight 2 Million Da and medium 1 Million Da) layered with free low molecular weight hyaluronic acid (500 kDa, 10%) embedded in the matrix. The cross-linked HA restores volume and lifts sagging skin, while the free HA is released gradually and binds CD44 receptors to bio-stimulate the skin, promoting collagen synthesis and increasing hyaluronic acid and fibronectin. The result is simultaneous volume restoration and dermal bioremodeling, with residual BDDE kept below 0.1 ppm.
Why Order From Allpara
Allpara offers genuine, verified PLURYAL products from vetted suppliers, with full batch-traceability and expert support. We serve clinics and aesthetic professionals with CE-certified products, fast EU-wide delivery from our EU warehouse, and competitive trade pricing. Our focus is your patients' safety, satisfaction and results - with dedicated after-sales support for your peace of mind.
Frequently Asked Questions
What does Pluryal Biosculpture treat?
Sagging and lax skin, and small losses of volume on the face and the back of the hands, while improving skin quality and hydration.
How is it different from a regular filler?
As a densifier it does more than fill: it lifts and tightens sagging skin while bio-stimulating the dermis, gradually releasing free hyaluronic acid that supports collagen and skin restructuring.
At what depth is it injected, and how often?
Into the deep dermis or superficial hypodermis. The starting course is 1 injection per month for 2-3 months, with maintenance every 5-6 months.
More from MD Skin solutions Laboratoires
Biorevitalisation
Mesotherapy
Clinic alternatives
/ Recently viewed
Pick up where you left off
Pluryal Biosculpture
In stock
CE Marked
Pluryal Biosculpture is a class III injectable medical device and a Bio densifier in the Pluryal range, designed for the bioremodeling of sagging skin. Built on Matricyal 3D Technology, it combines cross-linked hyaluronic acid at 25 mg/mL with 10% free hyaluronic acid embedded in the matrix, so it restores facial volume and lifts sagging skin while bio-stimulating the dermis for improved skin quality. It is injected into the deep dermis or superficial hypodermis of the face and the back of the hands, and is supplied as 2 x 1.1 mL pre-filled syringes with 2 x 27G and 2 x 30G needles, for professional use only.
Key Benefits of Pluryal Biosculpture
- Bio-remodeler: restores facial volume by lifting and tightening sagging skin while bio-stimulating the dermis
- Matricyal 3D cross-linked hyaluronic acid, 25 mg/mL with 10% free HA released gradually
- Rejuvenates, moisturises, restructures and restores small volume losses
- Very low residual BDDE (< 0.1 ppm); biocompatible and bioresorptive
- Visible results from the first session, with ex-vivo evidence of increased dermal hyaluronic acid, collagen and fibronectin
Indications and Professional Use
Main indications
- Bioremodeling of sagging skin (middle and deep tissue layers)
- Fine lines and local hypovolumes
- Lip biosculpturing
- Acne scars
- Skin quality, hydration and dermal restructuring
Professional use
For professional use only, by doctors trained in intradermal injection techniques. Pluryal Biosculpture is a class III injectable medical device (Matricyal 3D Technology) acting as a densifier for the bioremodeling of sagging skin, injected into the deep dermis or superficial hypodermis. Initial treatment: 3 sessions at 3-week intervals; maintenance: every 3–6 months. Injection techniques include the Double7Lift (cannula 18-22G / 70-90 mm), microdroplet / subdermal papules, the 5-point malar technique for skin laxity, and the fan pattern.
Treatment areas
- Face
- Lips
- Back of the hands
Patient profile
Adults from around 35 years of age seeking a non-surgical treatment for sagging and flaccidity, restoration of skin quality and hydration, and natural-looking rejuvenation. Administered by a practitioner trained in intradermal injection.
How Pluryal Biosculpture Works
Pluryal Biosculpture is built on Matricyal 3D Technology: cross-linked hyaluronic acid at 25 mg/mL (high molecular weight 2 Million Da and medium 1 Million Da) layered with free low molecular weight hyaluronic acid (500 kDa, 10%) embedded in the matrix. The cross-linked HA restores volume and lifts sagging skin, while the free HA is released gradually and binds CD44 receptors to bio-stimulate the skin, promoting collagen synthesis and increasing hyaluronic acid and fibronectin. The result is simultaneous volume restoration and dermal bioremodeling, with residual BDDE kept below 0.1 ppm.
Why Order From Allpara
Allpara offers genuine, verified PLURYAL products with full batch-traceability, CE-certified stock, fast EU-wide delivery and expert after-sales support.
Frequently Asked Questions
What does Pluryal Biosculpture treat?
Sagging and lax skin, and small losses of volume on the face and the back of the hands, while improving skin quality and hydration.
How is it different from a regular filler?
As a densifier it does more than fill: it lifts and tightens sagging skin while bio-stimulating the dermis, gradually releasing free hyaluronic acid that supports collagen and skin restructuring.
At what depth is it injected, and how often?
Into the deep dermis or superficial hypodermis. The starting course is 1 injection per month for 2-3 months, with maintenance every 5-6 months.
More from MD Skin solutions Laboratoires
View laboratory →* Professional-use product. Packaging may vary by batch or market. Refer to the supplied IFU for full directions and contraindications.