Дермальные филлеры
PLURYAL references stocked by ALLPARA for professional use, sourced direct and certified on every shipment.
CE Marked
SKU 10988
Pluryal Biosculpture
In stock
Volume
2 x 1,1 mL
Laboratory
MD Skin solutions Laboratoires
Origin
Люксембург
Trade price and history are verified-only
allpara supplies licensed practitioners. Sign in or apply for a B2B account to see live pricing, volume tiers and price history.
Pluryal Biosculpture is a class III injectable medical device and a Bio densifier in the Pluryal range, designed for the bioremodeling of sagging skin. It is suitable for professionals treating the face and the back of the hands, where it goes into the deep dermis or superficial hypodermis to restore facial volume and lift sagging skin while bio-stimulating the dermis for improved skin quality. Built on Matricyal 3D Technology, the product combines cross-linked hyaluronic acid at 25 mg/mL with 10% free hyaluronic acid embedded in the matrix and is intended for professional use only. It comes as 2 x 1.1 mL pre-filled syringes with 2 x 27G and 2 x 30G needles.
Ключевые преимущества Pluryal Biosculpture
- Bio-remodeler: restores facial volume by lifting and tightening sagging skin while bio-stimulating the dermis
- Matricyal 3D cross-linked hyaluronic acid, 25 mg/mL with 10% free HA released gradually
- Rejuvenates, moisturises, restructures and restores small volume losses
- Very low residual BDDE (< 0.1 ppm); biocompatible and bioresorptive
- Visible results from the first session, with ex-vivo evidence of increased dermal hyaluronic acid, collagen and fibronectin
Показания и профессиональное применение
Основные показания
- Bioremodeling of sagging skin (middle and deep tissue layers)
- Fine lines and local hypovolumes
- Lip biosculpturing
- Acne scars
- Skin quality, hydration and dermal restructuring
Профессиональное применение
For professional use only, by doctors trained in intradermal injection techniques. Pluryal Biosculpture is a class III injectable medical device (Matricyal 3D Technology) acting as a densifier for the bioremodeling of sagging skin, injected into the deep dermis or superficial hypodermis. Initial treatment: 3 sessions at 3-week intervals; maintenance: every 3-6 months. Injection techniques include the Double7Lift (cannula 18-22G / 70-90 mm), microdroplet / subdermal papules, the 5-point malar technique for skin laxity, and the fan pattern.
Зоны применения
- Face
- Lips
- Back of the hands
Профиль пациента
Adults from around 35 years of age seeking a non-surgical treatment for sagging and flaccidity, restoration of skin quality and hydration, and natural-looking rejuvenation. Administered by a practitioner trained in intradermal injection.
Как работает Pluryal Biosculpture
Pluryal Biosculpture is built on Matricyal 3D Technology: cross-linked hyaluronic acid at 25 mg/mL (high molecular weight 2 Million Da and medium 1 Million Da) layered with free low molecular weight hyaluronic acid (500 kDa, 10%) embedded in the matrix. The cross-linked HA restores volume and lifts sagging skin, while the free HA is released gradually and binds CD44 receptors to bio-stimulate the skin, promoting collagen synthesis and increasing hyaluronic acid and fibronectin. The result is simultaneous volume restoration and dermal bioremodeling, with residual BDDE kept below 0.1 ppm.
Почему стоит заказывать в Allpara
Allpara предлагает оригинальные проверенные продукты PLURYAL от проверенных поставщиков, с полной прослеживаемостью партий и экспертной поддержкой. Мы обслуживаем клиники и специалистов эстетической медицины: продукты с сертификатом CE, быстрая доставка по ЕС с нашего склада в ЕС и конкурентные оптовые цены. Наш приоритет - безопасность, удовлетворённость и результаты ваших пациентов, а также внимательная послепродажная поддержка для вашего спокойствия.
Часто задаваемые вопросы
What does Pluryal Biosculpture treat?
Sagging and lax skin, and small losses of volume on the face and the back of the hands, while improving skin quality and hydration.
How is it different from a regular filler?
As a densifier it does more than fill: it lifts and tightens sagging skin while bio-stimulating the dermis, gradually releasing free hyaluronic acid that supports collagen and skin restructuring.
At what depth is it injected, and how often?
Into the deep dermis or superficial hypodermis. The starting course is 1 injection per month for 2-3 months, with maintenance every 5-6 months.
Другие товары MD Skin solutions Laboratoires
Биоревитализация
Мезотерапия
Clinic alternatives
/ Recently viewed
Pick up where you left off
Pluryal Biosculpture
In stock
CE Marked
Pluryal Biosculpture is a class III injectable medical device and a Bio densifier in the Pluryal range, designed for the bioremodeling of sagging skin. It is suitable for professionals treating the face and the back of the hands, where it goes into the deep dermis or superficial hypodermis to restore facial volume and lift sagging skin while bio-stimulating the dermis for improved skin quality. Built on Matricyal 3D Technology, the product combines cross-linked hyaluronic acid at 25 mg/mL with 10% free hyaluronic acid embedded in the matrix and is intended for professional use only. It comes as 2 x 1.1 mL pre-filled syringes with 2 x 27G and 2 x 30G needles.
Ключевые преимущества Pluryal Biosculpture
- Bio-remodeler: restores facial volume by lifting and tightening sagging skin while bio-stimulating the dermis
- Matricyal 3D cross-linked hyaluronic acid, 25 mg/mL with 10% free HA released gradually
- Rejuvenates, moisturises, restructures and restores small volume losses
- Very low residual BDDE (< 0.1 ppm); biocompatible and bioresorptive
- Visible results from the first session, with ex-vivo evidence of increased dermal hyaluronic acid, collagen and fibronectin
Показания и профессиональное применение
Основные показания
- Bioremodeling of sagging skin (middle and deep tissue layers)
- Fine lines and local hypovolumes
- Lip biosculpturing
- Acne scars
- Skin quality, hydration and dermal restructuring
Профессиональное применение
For professional use only, by doctors trained in intradermal injection techniques. Pluryal Biosculpture is a class III injectable medical device (Matricyal 3D Technology) acting as a densifier for the bioremodeling of sagging skin, injected into the deep dermis or superficial hypodermis. Initial treatment: 3 sessions at 3-week intervals; maintenance: every 3-6 months. Injection techniques include the Double7Lift (cannula 18-22G / 70-90 mm), microdroplet / subdermal papules, the 5-point malar technique for skin laxity, and the fan pattern.
Зоны применения
- Face
- Lips
- Back of the hands
Профиль пациента
Adults from around 35 years of age seeking a non-surgical treatment for sagging and flaccidity, restoration of skin quality and hydration, and natural-looking rejuvenation. Administered by a practitioner trained in intradermal injection.
Как работает Pluryal Biosculpture
Pluryal Biosculpture is built on Matricyal 3D Technology: cross-linked hyaluronic acid at 25 mg/mL (high molecular weight 2 Million Da and medium 1 Million Da) layered with free low molecular weight hyaluronic acid (500 kDa, 10%) embedded in the matrix. The cross-linked HA restores volume and lifts sagging skin, while the free HA is released gradually and binds CD44 receptors to bio-stimulate the skin, promoting collagen synthesis and increasing hyaluronic acid and fibronectin. The result is simultaneous volume restoration and dermal bioremodeling, with residual BDDE kept below 0.1 ppm.
Почему стоит заказывать в Allpara
Allpara предлагает оригинальные проверенные продукты PLURYAL с полной прослеживаемостью партий, сертификатом CE, быстрой доставкой по ЕС и экспертной послепродажной поддержкой.
Часто задаваемые вопросы
What does Pluryal Biosculpture treat?
Sagging and lax skin, and small losses of volume on the face and the back of the hands, while improving skin quality and hydration.
How is it different from a regular filler?
As a densifier it does more than fill: it lifts and tightens sagging skin while bio-stimulating the dermis, gradually releasing free hyaluronic acid that supports collagen and skin restructuring.
At what depth is it injected, and how often?
Into the deep dermis or superficial hypodermis. The starting course is 1 injection per month for 2-3 months, with maintenance every 5-6 months.
Другие товары MD Skin solutions Laboratoires
Смотреть лабораторию →* Professional-use product. Packaging may vary by batch or market. Refer to the supplied IFU for full directions and contraindications.