Rellenos dérmicos
PLURYAL referencias disponibles en ALLPARA para uso profesional, de origen directo y certificadas en cada envío.
Marcado CE
SKU 10988
Pluryal Biosculpture
En stock
Volumen
2 x 1,1 mL
Laboratorio
MD Skin solutions Laboratoires
Origen
Luxemburgo
Indicación
Bioremodeling of sagging skin; restoration of small volume losses on face and hands
Zonas de tratamiento
El precio profesional y su historial son solo para cuentas verificadas
allpara suministra a profesionales autorizados. Inicie sesión o solicite una cuenta B2B para ver los precios en tiempo real, los tramos por volumen y el historial de precios.
Pluryal Biosculpture is a class III injectable medical device and a Bio densifier in the Pluryal range, designed for the bioremodeling of sagging skin. It is suitable for professionals treating the face and the back of the hands, where it goes into the deep dermis or superficial hypodermis to restore facial volume and lift sagging skin while bio-stimulating the dermis for improved skin quality. Built on Matricyal 3D Technology, the product combines cross-linked hyaluronic acid at 25 mg/mL with 10% free hyaluronic acid embedded in the matrix and is intended for professional use only. It comes as 2 x 1.1 mL pre-filled syringes with 2 x 27G and 2 x 30G needles.
Principales ventajas de Pluryal Biosculpture
- Bio-remodeler: restores facial volume by lifting and tightening sagging skin while bio-stimulating the dermis
- Matricyal 3D cross-linked hyaluronic acid, 25 mg/mL with 10% free HA released gradually
- Rejuvenates, moisturises, restructures and restores small volume losses
- Very low residual BDDE (< 0.1 ppm); biocompatible and bioresorptive
- Visible results from the first session, with ex-vivo evidence of increased dermal hyaluronic acid, collagen and fibronectin
Indicaciones y uso profesional
Indicaciones principales
- Bioremodeling of sagging skin (middle and deep tissue layers)
- Fine lines and local hypovolumes
- Lip biosculpturing
- Acne scars
- Skin quality, hydration and dermal restructuring
Uso profesional
For professional use only, by doctors trained in intradermal injection techniques. Pluryal Biosculpture is a class III injectable medical device (Matricyal 3D Technology) acting as a densifier for the bioremodeling of sagging skin, injected into the deep dermis or superficial hypodermis. Initial treatment: 3 sessions at 3-week intervals; maintenance: every 3-6 months. Injection techniques include the Double7Lift (cannula 18-22G / 70-90 mm), microdroplet / subdermal papules, the 5-point malar technique for skin laxity, and the fan pattern.
Zonas de tratamiento
- Face
- Lips
- Back of the hands
Perfil del paciente
Adults from around 35 years of age seeking a non-surgical treatment for sagging and flaccidity, restoration of skin quality and hydration, and natural-looking rejuvenation. Administered by a practitioner trained in intradermal injection.
Cómo funciona Pluryal Biosculpture
Pluryal Biosculpture is built on Matricyal 3D Technology: cross-linked hyaluronic acid at 25 mg/mL (high molecular weight 2 Million Da and medium 1 Million Da) layered with free low molecular weight hyaluronic acid (500 kDa, 10%) embedded in the matrix. The cross-linked HA restores volume and lifts sagging skin, while the free HA is released gradually and binds CD44 receptors to bio-stimulate the skin, promoting collagen synthesis and increasing hyaluronic acid and fibronectin. The result is simultaneous volume restoration and dermal bioremodeling, with residual BDDE kept below 0.1 ppm.
Por qué comprar en Allpara
Allpara ofrece productos PLURYAL originales y verificados de proveedores seleccionados, con trazabilidad completa de lotes y asesoramiento experto. Atendemos a clínicas y profesionales de la estética con productos con certificado CE, entrega rápida en toda la UE desde nuestro almacén en la UE y precios profesionales competitivos. Nuestra prioridad es la seguridad, la satisfacción y los resultados de sus pacientes, con un servicio posventa dedicado para su tranquilidad.
Preguntas frecuentes
What is Pluryal Biosculpture used for?
Sagging of the middle and deep tissue layers, fine lines, local hypovolumes and acne scars, including lip biosculpturing, on the face and the back of the hands, while improving skin quality and hydration.
How is it different from a regular filler?
As a densifier it does more than fill: it lifts and tightens sagging skin while bio-stimulating the dermis, gradually releasing free hyaluronic acid that supports collagen and skin restructuring.
At what depth is it injected, and how often?
Into the deep dermis or superficial hypodermis. The initial treatment is 3 sessions at 3-week intervals, with maintenance every 3-6 months.
Más productos de MD Skin solutions Laboratoires
Biorrevitalización
Mesoterapia
Alternativas para la clínica
/ Vistos recientemente
Retome donde lo dejó
Pluryal Biosculpture
En stock
Marcado CE
Precios solo para cuentas verificadas
Inicie sesión o solicite una cuenta B2B para ver su precio.
Solicitar cuenta B2B
Pluryal Biosculpture is a class III injectable medical device and a Bio densifier in the Pluryal range, designed for the bioremodeling of sagging skin. It is suitable for professionals treating the face and the back of the hands, where it goes into the deep dermis or superficial hypodermis to restore facial volume and lift sagging skin while bio-stimulating the dermis for improved skin quality. Built on Matricyal 3D Technology, the product combines cross-linked hyaluronic acid at 25 mg/mL with 10% free hyaluronic acid embedded in the matrix and is intended for professional use only. It comes as 2 x 1.1 mL pre-filled syringes with 2 x 27G and 2 x 30G needles.
Principales ventajas de Pluryal Biosculpture
- Bio-remodeler: restores facial volume by lifting and tightening sagging skin while bio-stimulating the dermis
- Matricyal 3D cross-linked hyaluronic acid, 25 mg/mL with 10% free HA released gradually
- Rejuvenates, moisturises, restructures and restores small volume losses
- Very low residual BDDE (< 0.1 ppm); biocompatible and bioresorptive
- Visible results from the first session, with ex-vivo evidence of increased dermal hyaluronic acid, collagen and fibronectin
Indicaciones y uso profesional
Indicaciones principales
- Bioremodeling of sagging skin (middle and deep tissue layers)
- Fine lines and local hypovolumes
- Lip biosculpturing
- Acne scars
- Skin quality, hydration and dermal restructuring
Uso profesional
For professional use only, by doctors trained in intradermal injection techniques. Pluryal Biosculpture is a class III injectable medical device (Matricyal 3D Technology) acting as a densifier for the bioremodeling of sagging skin, injected into the deep dermis or superficial hypodermis. Initial treatment: 3 sessions at 3-week intervals; maintenance: every 3-6 months. Injection techniques include the Double7Lift (cannula 18-22G / 70-90 mm), microdroplet / subdermal papules, the 5-point malar technique for skin laxity, and the fan pattern.
Zonas de tratamiento
- Face
- Lips
- Back of the hands
Perfil del paciente
Adults from around 35 years of age seeking a non-surgical treatment for sagging and flaccidity, restoration of skin quality and hydration, and natural-looking rejuvenation. Administered by a practitioner trained in intradermal injection.
Cómo funciona Pluryal Biosculpture
Pluryal Biosculpture is built on Matricyal 3D Technology: cross-linked hyaluronic acid at 25 mg/mL (high molecular weight 2 Million Da and medium 1 Million Da) layered with free low molecular weight hyaluronic acid (500 kDa, 10%) embedded in the matrix. The cross-linked HA restores volume and lifts sagging skin, while the free HA is released gradually and binds CD44 receptors to bio-stimulate the skin, promoting collagen synthesis and increasing hyaluronic acid and fibronectin. The result is simultaneous volume restoration and dermal bioremodeling, with residual BDDE kept below 0.1 ppm.
Por qué comprar en Allpara
Allpara ofrece productos PLURYAL originales y verificados, con trazabilidad completa de lotes, stock con certificado CE, entrega rápida en toda la UE y servicio posventa experto.
Preguntas frecuentes
What is Pluryal Biosculpture used for?
Sagging of the middle and deep tissue layers, fine lines, local hypovolumes and acne scars, including lip biosculpturing, on the face and the back of the hands, while improving skin quality and hydration.
How is it different from a regular filler?
As a densifier it does more than fill: it lifts and tightens sagging skin while bio-stimulating the dermis, gradually releasing free hyaluronic acid that supports collagen and skin restructuring.
At what depth is it injected, and how often?
Into the deep dermis or superficial hypodermis. The initial treatment is 3 sessions at 3-week intervals, with maintenance every 3-6 months.
Más productos de MD Skin solutions Laboratoires
Ver el laboratorio →* Producto de uso profesional. El envase puede variar según el lote o el mercado. Consulte las instrucciones de uso suministradas para las indicaciones completas y las contraindicaciones.