CE认证
皮肤填充剂
Pluryal Biosculpture is a class III injectable medical device and a Bio densifier in the Pluryal range, designed for the bioremodeling of sagging skin. It is suitable for professionals treating the face and the back of the hands, where it goes into the deep dermis or superficial hypodermis to restore facial volume and lift sagging skin while bio-stimulating the dermis for improved skin quality. Built on Matricyal 3D Technology, the product combines cross-linked hyaluronic acid at 25 mg/mL with 10% free hyaluronic acid embedded in the matrix and is intended for professional use only. It comes as 2 x 1.1 mL pre-filled syringes with 2 x 27G and 2 x 30G needles.
主要优势： Pluryal Biosculpture
- Bio-remodeler: restores facial volume by lifting and tightening sagging skin while bio-stimulating the dermis
- Matricyal 3D cross-linked hyaluronic acid, 25 mg/mL with 10% free HA released gradually
- Rejuvenates, moisturises, restructures and restores small volume losses
- Very low residual BDDE (< 0.1 ppm); biocompatible and bioresorptive
- Visible results from the first session, with ex-vivo evidence of increased dermal hyaluronic acid, collagen and fibronectin
适应症与专业用途
主要适应症
- Bioremodeling of sagging skin (middle and deep tissue layers)
- Fine lines and local hypovolumes
- Lip biosculpturing
- Acne scars
- Skin quality, hydration and dermal restructuring
专业用途
For professional use only, by doctors trained in intradermal injection techniques. Pluryal Biosculpture is a class III injectable medical device (Matricyal 3D Technology) acting as a densifier for the bioremodeling of sagging skin, injected into the deep dermis or superficial hypodermis. Initial treatment: 3 sessions at 3-week intervals; maintenance: every 3-6 months. Injection techniques include the Double7Lift (cannula 18-22G / 70-90 mm), microdroplet / subdermal papules, the 5-point malar technique for skin laxity, and the fan pattern.
治疗部位
- Face
- Lips
- Back of the hands
适用患者
Adults from around 35 years of age seeking a non-surgical treatment for sagging and flaccidity, restoration of skin quality and hydration, and natural-looking rejuvenation. Administered by a practitioner trained in intradermal injection.
作用原理： Pluryal Biosculpture
Pluryal Biosculpture is built on Matricyal 3D Technology: cross-linked hyaluronic acid at 25 mg/mL (high molecular weight 2 Million Da and medium 1 Million Da) layered with free low molecular weight hyaluronic acid (500 kDa, 10%) embedded in the matrix. The cross-linked HA restores volume and lifts sagging skin, while the free HA is released gradually and binds CD44 receptors to bio-stimulate the skin, promoting collagen synthesis and increasing hyaluronic acid and fibronectin. The result is simultaneous volume restoration and dermal bioremodeling, with residual BDDE kept below 0.1 ppm.
为什么选择在 Allpara 订购
Allpara 提供正品、经过验证的 PLURYAL 产品，来自经过严格审核的供应商，具备完整的批次可追溯性和专家支持。我们为诊所和医美专业人士提供CE认证产品、从欧盟仓库快速配送至欧盟各地，以及具有竞争力的专业价格。我们关注的是您患者的安全、满意度和效果，并提供专属售后支持，让您安心无忧。
常见问题
What is Pluryal Biosculpture used for?
Sagging of the middle and deep tissue layers, fine lines, local hypovolumes and acne scars, including lip biosculpturing, on the face and the back of the hands, while improving skin quality and hydration.
How is it different from a regular filler?
As a densifier it does more than fill: it lifts and tightens sagging skin while bio-stimulating the dermis, gradually releasing free hyaluronic acid that supports collagen and skin restructuring.
At what depth is it injected, and how often?
Into the deep dermis or superficial hypodermis. The initial treatment is 3 sessions at 3-week intervals, with maintenance every 3-6 months.
更多产品： MD Skin solutions Laboratoires
生物活化
诊所替代选择
/ 最近浏览
继续浏览
Pluryal Biosculpture is a class III injectable medical device and a Bio densifier in the Pluryal range, designed for the bioremodeling of sagging skin. It is suitable for professionals treating the face and the back of the hands, where it goes into the deep dermis or superficial hypodermis to restore facial volume and lift sagging skin while bio-stimulating the dermis for improved skin quality. Built on Matricyal 3D Technology, the product combines cross-linked hyaluronic acid at 25 mg/mL with 10% free hyaluronic acid embedded in the matrix and is intended for professional use only. It comes as 2 x 1.1 mL pre-filled syringes with 2 x 27G and 2 x 30G needles.
主要优势： Pluryal Biosculpture
- Bio-remodeler: restores facial volume by lifting and tightening sagging skin while bio-stimulating the dermis
- Matricyal 3D cross-linked hyaluronic acid, 25 mg/mL with 10% free HA released gradually
- Rejuvenates, moisturises, restructures and restores small volume losses
- Very low residual BDDE (< 0.1 ppm); biocompatible and bioresorptive
- Visible results from the first session, with ex-vivo evidence of increased dermal hyaluronic acid, collagen and fibronectin
适应症与专业用途
主要适应症
- Bioremodeling of sagging skin (middle and deep tissue layers)
- Fine lines and local hypovolumes
- Lip biosculpturing
- Acne scars
- Skin quality, hydration and dermal restructuring
专业用途
For professional use only, by doctors trained in intradermal injection techniques. Pluryal Biosculpture is a class III injectable medical device (Matricyal 3D Technology) acting as a densifier for the bioremodeling of sagging skin, injected into the deep dermis or superficial hypodermis. Initial treatment: 3 sessions at 3-week intervals; maintenance: every 3-6 months. Injection techniques include the Double7Lift (cannula 18-22G / 70-90 mm), microdroplet / subdermal papules, the 5-point malar technique for skin laxity, and the fan pattern.
治疗部位
- Face
- Lips
- Back of the hands
适用患者
Adults from around 35 years of age seeking a non-surgical treatment for sagging and flaccidity, restoration of skin quality and hydration, and natural-looking rejuvenation. Administered by a practitioner trained in intradermal injection.
作用原理： Pluryal Biosculpture
Pluryal Biosculpture is built on Matricyal 3D Technology: cross-linked hyaluronic acid at 25 mg/mL (high molecular weight 2 Million Da and medium 1 Million Da) layered with free low molecular weight hyaluronic acid (500 kDa, 10%) embedded in the matrix. The cross-linked HA restores volume and lifts sagging skin, while the free HA is released gradually and binds CD44 receptors to bio-stimulate the skin, promoting collagen synthesis and increasing hyaluronic acid and fibronectin. The result is simultaneous volume restoration and dermal bioremodeling, with residual BDDE kept below 0.1 ppm.
为什么选择在 Allpara 订购
Allpara 提供正品、经过验证的 PLURYAL 产品，具备完整的批次可追溯性、CE认证库存、欧盟范围内快速配送以及专业的售后支持。
常见问题
What is Pluryal Biosculpture used for?
Sagging of the middle and deep tissue layers, fine lines, local hypovolumes and acne scars, including lip biosculpturing, on the face and the back of the hands, while improving skin quality and hydration.
How is it different from a regular filler?
As a densifier it does more than fill: it lifts and tightens sagging skin while bio-stimulating the dermis, gradually releasing free hyaluronic acid that supports collagen and skin restructuring.
At what depth is it injected, and how often?
Into the deep dermis or superficial hypodermis. The initial treatment is 3 sessions at 3-week intervals, with maintenance every 3-6 months.
更多产品： MD Skin solutions Laboratoires
查看制造商 →* 专业用途产品。包装可能因批次或市场而异。完整的使用说明和禁忌症请参阅随附的使用说明书。