صرف نظر و مشاهده محتوا
· فیلرهای پوستی
SKU 10988

Pluryal Biosculpture

موجود
حجم
2 x 1,1 mL
آزمایشگاه
MD Skin solutions Laboratoires
مبدأ
لوکزامبورگ
قیمت عمده و سابقه آن فقط برای حساب‌های تأییدشده نمایش داده می‌شود
allpara به پزشکان و متخصصان دارای مجوز عرضه می‌کند. برای مشاهده قیمت‌های لحظه‌ای، سطوح قیمت حجمی و سابقه قیمت، وارد شوید یا برای حساب B2B درخواست دهید.
برچسب‌ها

Pluryal Biosculpture is a class III injectable medical device and a Bio densifier in the Pluryal range, designed for the bioremodeling of sagging skin. It is suitable for professionals treating the face and the back of the hands, where it goes into the deep dermis or superficial hypodermis to restore facial volume and lift sagging skin while bio-stimulating the dermis for improved skin quality. Built on Matricyal 3D Technology, the product combines cross-linked hyaluronic acid at 25 mg/mL with 10% free hyaluronic acid embedded in the matrix and is intended for professional use only. It comes as 2 x 1.1 mL pre-filled syringes with 2 x 27G and 2 x 30G needles.

مزایای اصلی Pluryal Biosculpture

  • Bio-remodeler: restores facial volume by lifting and tightening sagging skin while bio-stimulating the dermis
  • Matricyal 3D cross-linked hyaluronic acid, 25 mg/mL with 10% free HA released gradually
  • Rejuvenates, moisturises, restructures and restores small volume losses
  • Very low residual BDDE (< 0.1 ppm); biocompatible and bioresorptive
  • Visible results from the first session, with ex-vivo evidence of increased dermal hyaluronic acid, collagen and fibronectin
اطلاعات کلیدی
برند PLURYAL
سازنده MD Skin Solutions
کشور سازنده Luxembourg
گواهینامه CE-marked Class III medical device. Syringe: CE 0373 (MD Skin Solutions). Needles: CE 0123 (Sterimedix LTD).
ترکیبات Non-animal hyaluronic acid, 25 mg/mL (Matricyal 3D Technology): cross-linked high molecular weight HA (2 Million Da) 60% and cross-linked medium molecular weight HA (1 Million Da) 30%, plus free low molecular weight HA (500 kDa) 10% embedded in the matrix. Residual BDDE < 0.1 ppm. Steam sterilised.
بسته‌بندی 2 x 1.1 mL pre-filled syringes; 2 x 27G and 2 x 30G needles
نوع کاربرد Professional use only: biostimulating cross-linked hyaluronic acid injectable (Pluryal Bio densifier)
عمق تزریق Deep dermis / superficial hypodermis
پروتکل / مدت Initial treatment: 3 sessions at 3-week intervals; maintenance: every 3-6 months

موارد مصرف و استفاده حرفه‌ای

موارد مصرف اصلی

  • Bioremodeling of sagging skin (middle and deep tissue layers)
  • Fine lines and local hypovolumes
  • Lip biosculpturing
  • Acne scars
  • Skin quality, hydration and dermal restructuring

استفاده حرفه‌ای

For professional use only, by doctors trained in intradermal injection techniques. Pluryal Biosculpture is a class III injectable medical device (Matricyal 3D Technology) acting as a densifier for the bioremodeling of sagging skin, injected into the deep dermis or superficial hypodermis. Initial treatment: 3 sessions at 3-week intervals; maintenance: every 3-6 months. Injection techniques include the Double7Lift (cannula 18-22G / 70-90 mm), microdroplet / subdermal papules, the 5-point malar technique for skin laxity, and the fan pattern.

نواحی درمان

  • Face
  • Lips
  • Back of the hands

مشخصات بیمار

Adults from around 35 years of age seeking a non-surgical treatment for sagging and flaccidity, restoration of skin quality and hydration, and natural-looking rejuvenation. Administered by a practitioner trained in intradermal injection.

نحوه عملکرد Pluryal Biosculpture ​

Pluryal Biosculpture is built on Matricyal 3D Technology: cross-linked hyaluronic acid at 25 mg/mL (high molecular weight 2 Million Da and medium 1 Million Da) layered with free low molecular weight hyaluronic acid (500 kDa, 10%) embedded in the matrix. The cross-linked HA restores volume and lifts sagging skin, while the free HA is released gradually and binds CD44 receptors to bio-stimulate the skin, promoting collagen synthesis and increasing hyaluronic acid and fibronectin. The result is simultaneous volume restoration and dermal bioremodeling, with residual BDDE kept below 0.1 ppm.

چرا از Allpara سفارش دهید

Allpara محصولات PLURYAL اصل و تأییدشده را از تأمین‌کنندگان منتخب، با قابلیت ردیابی کامل سری ساخت و پشتیبانی تخصصی ارائه می‌دهد. ما به کلینیک‌ها و متخصصان زیبایی با محصولات دارای گواهی CE، ارسال سریع به سراسر اتحادیه اروپا از انبار ما در اتحادیه اروپا و قیمت‌های رقابتی حرفه‌ای خدمت می‌کنیم. تمرکز ما بر ایمنی، رضایت و نتایج بیماران شماست - همراه با پشتیبانی اختصاصی پس از فروش برای آسودگی خاطر شما.

پرسش‌های متداول

What is Pluryal Biosculpture used for?

Sagging of the middle and deep tissue layers, fine lines, local hypovolumes and acne scars, including lip biosculpturing, on the face and the back of the hands, while improving skin quality and hydration.

How is it different from a regular filler?

As a densifier it does more than fill: it lifts and tightens sagging skin while bio-stimulating the dermis, gradually releasing free hyaluronic acid that supports collagen and skin restructuring.

At what depth is it injected, and how often?

Into the deep dermis or superficial hypodermis. The initial treatment is 3 sessions at 3-week intervals, with maintenance every 3-6 months.

محصولات بیشتر از MD Skin solutions Laboratoires

مشاهده آزمایشگاه

PLURYAL کد محصول که ALLPARA برای استفاده حرفه‌ای در انبار دارد؛ تأمین مستقیم و گواهی‌شده در هر ارسال.

مشاهده PLURYAL محصول

جایگزین‌های کلینیکی

همه محصولات

Pluryal Biosculpture

موجود
دارای نشان CE دارای نشان CE Pluryal Biosculpture
قیمت‌گذاری فقط برای حساب‌های تأییدشده
برای مشاهده قیمت خود وارد شوید یا برای حساب B2B درخواست دهید.
درخواست حساب B2B

Pluryal Biosculpture is a class III injectable medical device and a Bio densifier in the Pluryal range, designed for the bioremodeling of sagging skin. It is suitable for professionals treating the face and the back of the hands, where it goes into the deep dermis or superficial hypodermis to restore facial volume and lift sagging skin while bio-stimulating the dermis for improved skin quality. Built on Matricyal 3D Technology, the product combines cross-linked hyaluronic acid at 25 mg/mL with 10% free hyaluronic acid embedded in the matrix and is intended for professional use only. It comes as 2 x 1.1 mL pre-filled syringes with 2 x 27G and 2 x 30G needles.

مزایای اصلی Pluryal Biosculpture

  • Bio-remodeler: restores facial volume by lifting and tightening sagging skin while bio-stimulating the dermis
  • Matricyal 3D cross-linked hyaluronic acid, 25 mg/mL with 10% free HA released gradually
  • Rejuvenates, moisturises, restructures and restores small volume losses
  • Very low residual BDDE (< 0.1 ppm); biocompatible and bioresorptive
  • Visible results from the first session, with ex-vivo evidence of increased dermal hyaluronic acid, collagen and fibronectin
اطلاعات کلیدی
برند PLURYAL
سازنده MD Skin Solutions
کشور سازنده Luxembourg
گواهینامه CE-marked Class III medical device. Syringe: CE 0373 (MD Skin Solutions). Needles: CE 0123 (Sterimedix LTD).
ترکیبات Non-animal hyaluronic acid, 25 mg/mL (Matricyal 3D Technology): cross-linked high molecular weight HA (2 Million Da) 60% and cross-linked medium molecular weight HA (1 Million Da) 30%, plus free low molecular weight HA (500 kDa) 10% embedded in the matrix. Residual BDDE < 0.1 ppm. Steam sterilised.
بسته‌بندی 2 x 1.1 mL pre-filled syringes; 2 x 27G and 2 x 30G needles
نوع کاربرد Professional use only: biostimulating cross-linked hyaluronic acid injectable (Pluryal Bio densifier)
عمق تزریق Deep dermis / superficial hypodermis
پروتکل / مدت Initial treatment: 3 sessions at 3-week intervals; maintenance: every 3-6 months

موارد مصرف و استفاده حرفه‌ای

موارد مصرف اصلی

  • Bioremodeling of sagging skin (middle and deep tissue layers)
  • Fine lines and local hypovolumes
  • Lip biosculpturing
  • Acne scars
  • Skin quality, hydration and dermal restructuring

استفاده حرفه‌ای

For professional use only, by doctors trained in intradermal injection techniques. Pluryal Biosculpture is a class III injectable medical device (Matricyal 3D Technology) acting as a densifier for the bioremodeling of sagging skin, injected into the deep dermis or superficial hypodermis. Initial treatment: 3 sessions at 3-week intervals; maintenance: every 3-6 months. Injection techniques include the Double7Lift (cannula 18-22G / 70-90 mm), microdroplet / subdermal papules, the 5-point malar technique for skin laxity, and the fan pattern.

نواحی درمان

  • Face
  • Lips
  • Back of the hands

مشخصات بیمار

Adults from around 35 years of age seeking a non-surgical treatment for sagging and flaccidity, restoration of skin quality and hydration, and natural-looking rejuvenation. Administered by a practitioner trained in intradermal injection.

نحوه عملکرد Pluryal Biosculpture ​

Pluryal Biosculpture is built on Matricyal 3D Technology: cross-linked hyaluronic acid at 25 mg/mL (high molecular weight 2 Million Da and medium 1 Million Da) layered with free low molecular weight hyaluronic acid (500 kDa, 10%) embedded in the matrix. The cross-linked HA restores volume and lifts sagging skin, while the free HA is released gradually and binds CD44 receptors to bio-stimulate the skin, promoting collagen synthesis and increasing hyaluronic acid and fibronectin. The result is simultaneous volume restoration and dermal bioremodeling, with residual BDDE kept below 0.1 ppm.

چرا از Allpara سفارش دهید

Allpara محصولات PLURYAL اصل و تأییدشده را با قابلیت ردیابی کامل سری ساخت، موجودی دارای گواهی CE، ارسال سریع در سراسر اتحادیه اروپا و پشتیبانی تخصصی پس از فروش ارائه می‌دهد.

پرسش‌های متداول

What is Pluryal Biosculpture used for?

Sagging of the middle and deep tissue layers, fine lines, local hypovolumes and acne scars, including lip biosculpturing, on the face and the back of the hands, while improving skin quality and hydration.

How is it different from a regular filler?

As a densifier it does more than fill: it lifts and tightens sagging skin while bio-stimulating the dermis, gradually releasing free hyaluronic acid that supports collagen and skin restructuring.

At what depth is it injected, and how often?

Into the deep dermis or superficial hypodermis. The initial treatment is 3 sessions at 3-week intervals, with maintenance every 3-6 months.

محصولات بیشتر از MD Skin solutions Laboratoires

مشاهده آزمایشگاه ←
* محصول مخصوص استفاده حرفه‌ای. بسته‌بندی ممکن است بسته به سری ساخت یا بازار متفاوت باشد. برای دستورالعمل کامل و موارد منع مصرف، به IFU همراه محصول مراجعه کنید.