VISCODERM references stocked by ALLPARA for professional use, sourced direct and certified on every shipment.
Viscoderm 2.0
Viscoderm 2.0 is a sterile injectable medical device manufactured by IBSA Farmaceutici Italia S.r.l. It contains 20 mg/ml of highly purified sodium hyaluronate obtained through fermentation and is intended for intradermal administration by qualified healthcare professionals. It is indicated for restoring the normal physiological condition of the dermis in cases of severe xerodermia associated with dermatitis and/or psoriasis.
Key Benefits of Viscoderm 2.0
- Sterile, single-use injectable medical device, CE 0477
- Highly purified sodium hyaluronate obtained by fermentation, not subjected to chemical modification processes
- Molecular weight of about 1 million Dalton, very close to endogenous hyaluronic acid, making the product totally biocompatible
- Rehydrates the tissues and favours tissue remodelling
- Indicated for severe xerodermia associated with dermatitis and/or psoriasis
- Sold on medical prescription only, for administration by qualified personnel
Indications and Professional Use
Main indications
- Severe xerodermia associated with dermatitis and/or psoriasis
- Restoration of the normal physiological condition of the dermis
- Rehydration of skin tissue where cell turnover of the stratum corneum is increased
Professional use
Viscoderm 2.0 is a sterile, single-use medical device for intradermal use, to be sold on medical prescription only and administered by intradermal injection by qualified personnel only. It is injected at ambient temperature under strict aseptic conditions, intradermally at medium-deep level using a linear or picotage technique, with the 30G x 1/2 inch (0.3 x 12 mm) needle included in the kit. The recommended posology is an initial cycle of three treatment sessions at one-week intervals, possibly followed by monthly maintenance sessions. Do not inject intravascularly, into the muscles or tendons, or for breast enlargement. Do not mix with other products, and do not mix with disinfectants such as quaternary ammonium salts or chlorhexidine, as a precipitate may form. The content of the pre-filled syringe is sterile and the outer surface of the syringe is not; do not use after the expiry date or if the packaging is open or damaged. Do not re-sterilise and do not reuse. Once opened, use immediately and discard after use.
Treatment areas
- Intradermal administration, at medium-deep level
- The instructions for use do not restrict the device to named facial or body areas; the treating practitioner determines the area treated
Patient profile
Viscoderm 2.0 is indicated for adults of both sexes. The device restores the normal physiological condition of the dermis in cases of xerodermia related to dermatitis and/or psoriasis, and the 2.0% concentration is indicated to counteract severe xerodermia. Suitability is determined by the treating practitioner. The injection site must be on healthy skin. It must not be used in pregnant or breast-feeding women, in patients with autoimmune diseases, or in cases of known hypersensitivity or allergy to the components of the product. It must not be used in conjunction with treatments such as laser resurfacing and medium-deep peeling, and must not be injected into areas where inflammatory processes are present.
How Viscoderm 2.0 Works
Viscoderm 2.0 delivers highly purified sodium hyaluronate, obtained by fermentation and not subjected to chemical modification processes, directly into the dermis. The viscoelastic and moisturising properties of hyaluronic acid, combined with the possibility of maintaining it at adequate levels in the skin tissues, rehydrate the tissues and create the optimal conditions to prevent and combat the process of dry skin, favouring tissue remodelling. Intradermal administration restores the physiological quantity of hyaluronic acid in the treated tissues. At a molecular weight of about 1 million Dalton, very close to the natural molecular weight of endogenous hyaluronic acid, the product is totally biocompatible. The 2.0% concentration is the highest of the three in the range and is the one indicated for severe xerodermia.
Why Order From Allpara
Allpara offers genuine, verified VISCODERM products from vetted suppliers, with full batch-traceability and expert support. We serve clinics and aesthetic professionals with CE-certified products, fast EU-wide delivery from our EU warehouse, and competitive trade pricing. Our focus is your patients' safety, satisfaction and results - with dedicated after-sales support for your peace of mind.
Frequently Asked Questions
How does Viscoderm 2.0 differ from Viscoderm 0.8 and 1.6?
The three concentrations share one intended use and differ by the degree of xerodermia they address. Viscoderm 0.8 (8 mg/1 ml) is indicated to counteract slight xerodermia, Viscoderm 1.6 (24 mg/1.5 ml) moderate xerodermia, and Viscoderm 2.0 (20 mg/1 ml) severe xerodermia.
What is Viscoderm 2.0 indicated for?
It is indicated for adults of both sexes, for restoration of the normal physiological condition of the dermis in cases of xerodermia related to dermatitis and/or psoriasis, with the 2.0% concentration indicated for the severe degree.
What is the treatment schedule?
An initial cycle of three treatment sessions at one-week intervals, possibly followed by monthly maintenance sessions. It is advisable to replace the needle halfway through a session.
Who should not be treated with Viscoderm 2.0?
It must not be used in conjunction with treatments such as laser resurfacing and medium-deep peeling. The instructions for use also state that it should not be used in pregnant or breast-feeding women, in patients with autoimmune diseases, or in cases of known hypersensitivity or allergy to the components, and that the injection site must be on healthy skin and free of inflammatory processes.
More from IBSA
ALIAXIN references stocked by ALLPARA for professional use, sourced direct and certified on every shipment.
ALIAXIN Products
View all 6PROFHILO references stocked by ALLPARA for professional use, sourced direct and certified on every shipment.
PROFHILO Products
View all 8SINOVIAL references stocked by ALLPARA for professional use, sourced direct and certified on every shipment.
SINOVIAL Products
View all 4Clinic alternatives
Pick up where you left off
Viscoderm 2.0
Viscoderm 2.0 is a sterile injectable medical device manufactured by IBSA Farmaceutici Italia S.r.l. It contains 20 mg/ml of highly purified sodium hyaluronate obtained through fermentation and is intended for intradermal administration by qualified healthcare professionals. It is indicated for restoring the normal physiological condition of the dermis in cases of severe xerodermia associated with dermatitis and/or psoriasis.
Key Benefits of Viscoderm 2.0
- Sterile, single-use injectable medical device, CE 0477
- Highly purified sodium hyaluronate obtained by fermentation, not subjected to chemical modification processes
- Molecular weight of about 1 million Dalton, very close to endogenous hyaluronic acid, making the product totally biocompatible
- Rehydrates the tissues and favours tissue remodelling
- Indicated for severe xerodermia associated with dermatitis and/or psoriasis
- Sold on medical prescription only, for administration by qualified personnel
Indications and Professional Use
Main indications
- Severe xerodermia associated with dermatitis and/or psoriasis
- Restoration of the normal physiological condition of the dermis
- Rehydration of skin tissue where cell turnover of the stratum corneum is increased
Professional use
Viscoderm 2.0 is a sterile, single-use medical device for intradermal use, to be sold on medical prescription only and administered by intradermal injection by qualified personnel only. It is injected at ambient temperature under strict aseptic conditions, intradermally at medium-deep level using a linear or picotage technique, with the 30G x 1/2 inch (0.3 x 12 mm) needle included in the kit. The recommended posology is an initial cycle of three treatment sessions at one-week intervals, possibly followed by monthly maintenance sessions. Do not inject intravascularly, into the muscles or tendons, or for breast enlargement. Do not mix with other products, and do not mix with disinfectants such as quaternary ammonium salts or chlorhexidine, as a precipitate may form. The content of the pre-filled syringe is sterile and the outer surface of the syringe is not; do not use after the expiry date or if the packaging is open or damaged. Do not re-sterilise and do not reuse. Once opened, use immediately and discard after use.
Treatment areas
- Intradermal administration, at medium-deep level
- The instructions for use do not restrict the device to named facial or body areas; the treating practitioner determines the area treated
Patient profile
Viscoderm 2.0 is indicated for adults of both sexes. The device restores the normal physiological condition of the dermis in cases of xerodermia related to dermatitis and/or psoriasis, and the 2.0% concentration is indicated to counteract severe xerodermia. Suitability is determined by the treating practitioner. The injection site must be on healthy skin. It must not be used in pregnant or breast-feeding women, in patients with autoimmune diseases, or in cases of known hypersensitivity or allergy to the components of the product. It must not be used in conjunction with treatments such as laser resurfacing and medium-deep peeling, and must not be injected into areas where inflammatory processes are present.
How Viscoderm 2.0 Works
Viscoderm 2.0 delivers highly purified sodium hyaluronate, obtained by fermentation and not subjected to chemical modification processes, directly into the dermis. The viscoelastic and moisturising properties of hyaluronic acid, combined with the possibility of maintaining it at adequate levels in the skin tissues, rehydrate the tissues and create the optimal conditions to prevent and combat the process of dry skin, favouring tissue remodelling. Intradermal administration restores the physiological quantity of hyaluronic acid in the treated tissues. At a molecular weight of about 1 million Dalton, very close to the natural molecular weight of endogenous hyaluronic acid, the product is totally biocompatible. The 2.0% concentration is the highest of the three in the range and is the one indicated for severe xerodermia.
Why Order From Allpara
Allpara offers genuine, verified VISCODERM products with full batch-traceability, CE-certified stock, fast EU-wide delivery and expert after-sales support.
Frequently Asked Questions
How does Viscoderm 2.0 differ from Viscoderm 0.8 and 1.6?
The three concentrations share one intended use and differ by the degree of xerodermia they address. Viscoderm 0.8 (8 mg/1 ml) is indicated to counteract slight xerodermia, Viscoderm 1.6 (24 mg/1.5 ml) moderate xerodermia, and Viscoderm 2.0 (20 mg/1 ml) severe xerodermia.
What is Viscoderm 2.0 indicated for?
It is indicated for adults of both sexes, for restoration of the normal physiological condition of the dermis in cases of xerodermia related to dermatitis and/or psoriasis, with the 2.0% concentration indicated for the severe degree.
What is the treatment schedule?
An initial cycle of three treatment sessions at one-week intervals, possibly followed by monthly maintenance sessions. It is advisable to replace the needle halfway through a session.
Who should not be treated with Viscoderm 2.0?
It must not be used in conjunction with treatments such as laser resurfacing and medium-deep peeling. The instructions for use also state that it should not be used in pregnant or breast-feeding women, in patients with autoimmune diseases, or in cases of known hypersensitivity or allergy to the components, and that the injection site must be on healthy skin and free of inflammatory processes.