REVANESSE pozycji w ofercie ALLPARA do użytku profesjonalnego, kupowanych bezpośrednio i z certyfikatem przy każdej wysyłce.
Revanesse Sculpt ™+
Revanesse Sculpt+ is a colourless, odourless and transparent aqueous gel of synthetic origin from Prollenium Medical Technologies in Aurora, Canada, developed for medium to deep facial rhytides and for lipoatrophy. Practitioners place it in the middle part of the dermis layer, where it offers an implantation life of 6 to 12 months on average. The product combines 25 mg/mL of BDDE cross-linked hyaluronic acid with 0.3% lidocaine in phosphate-buffered saline and is intended for professional use. Two 1.2 mL syringes come in each box, together with up to two sterilised 27G needles.
*Note: This product may have market-specific regulatory status and availability. Please contact ALLPARA to confirm availability for your market.
Najważniejsze zalety: Revanesse Sculpt ™+
- Cross-linked hyaluronic acid 25 mg/mL with 0.3% lidocaine for injection comfort
- Indicated for medium to deep facial rhytides and for lipoatrophy
- Placed in the middle part of the dermis layer
- Implantation life averages 6 to 12 months
- Supplied as two 1.2 mL pre-filled syringes with up to two sterilised 27G needles
- BDDE cross-linked in phosphate-buffered saline
Wskazania i zastosowanie profesjonalne
Główne wskazania
- Medium to deep facial rhytides
- Lipoatrophy
Zastosowanie profesjonalne
For professional use. Revanesse Sculpt+ should only be injected by or under the direct supervision of qualified physicians trained in the proper injection technique for filling facial wrinkles, and is not for retail sale or self-administration. It is placed in the middle part of the dermis layer. The area must be thoroughly disinfected and injection performed under sterile conditions; bring the product to room temperature for 30 minutes beforehand, prime the syringe until a small drop appears at the needle tip, and inject slowly with the least pressure necessary. If the skin blanches, stop immediately and massage until normal colour returns. It must not be injected into an area already containing another filler or a permanent implant, never used for breast enlargement or implantation into bone, tendon, ligament or muscle, and must not contact quaternary ammonium salts such as benzalkonium chloride. Store between 2 and 25 degrees Celsius, protected from direct sunlight and freezing.
Obszary zabiegowe
- Face
Profil pacjenta
For adult patients seeking correction of medium to deep facial rhytides or of lipoatrophy, as assessed by a qualified physician. Contraindications include hypersensitivity to amide-type local anaesthetics, hypertrophic scarring, acne or other inflammatory skin disease, acute or chronic skin disease at or near the injection site, auto-immune disorders or immunotherapy, multiple severe allergies, coagulation defects or anti-coagulation therapy, sensitivity to hyaluronic acid, and unattainable expectations. It contains trace amounts of gram-positive bacterial proteins and is contraindicated in patients allergic to such material. It must not be used during pregnancy or lactation, in anyone under 18, or in conjunction with laser, intense pulsed light, chemical peeling or dermabrasion.
Jak działa Revanesse Sculpt ™+
Sculpt+ is a cross-linked hyaluronic acid gel that occupies volume in the dermis where it is placed, correcting medium to deep rhytides and the volume loss of lipoatrophy. Because it is placed in the middle part of the dermis rather than superficially, how long it lasts depends on the depth and location of the injection, which is why it lasts 6 to 12 months rather than a fixed period. The 0.3% lidocaine is present for injection comfort, which makes hypersensitivity to amide-type anaesthetics an outright contraindication.
Dlaczego warto zamawiać w Allpara
Allpara oferuje oryginalne, sprawdzone produkty REVANESSE od zweryfikowanych dostawców, z pełną identyfikowalnością partii i wsparciem ekspertów. Obsługujemy kliniki i specjalistów medycyny estetycznej, oferując produkty z oznakowaniem CE, szybką dostawę na terenie całej UE z naszego magazynu w UE oraz konkurencyjne ceny hurtowe. Najważniejsze są dla nas bezpieczeństwo, satysfakcja i efekty Twoich pacjentów - z indywidualnym wsparciem posprzedażowym dla Twojego spokoju.
Najczęściej zadawane pytania
How long does Revanesse Sculpt+ last?
Revanesse Sculpt+ has an implantation life averaging 6 to 12 months, depending on the depth and location of the injection.
What should a practitioner do if the skin blanches during injection?
Stop the injection immediately and massage the area until the skin returns to its normal colour. Blanching can signal intravascular placement, which has been associated with embolisation, vision impairment, blindness, skin necrosis and stroke.
Więcej od Prollenium Medical Technologies
Alternatywy dla kliniki
Kontynuuj przeglądanie
Revanesse Sculpt ™+
Revanesse Sculpt+ is a colourless, odourless and transparent aqueous gel of synthetic origin from Prollenium Medical Technologies in Aurora, Canada, developed for medium to deep facial rhytides and for lipoatrophy. Practitioners place it in the middle part of the dermis layer, where it offers an implantation life of 6 to 12 months on average. The product combines 25 mg/mL of BDDE cross-linked hyaluronic acid with 0.3% lidocaine in phosphate-buffered saline and is intended for professional use. Two 1.2 mL syringes come in each box, together with up to two sterilised 27G needles.
*Note: This product may have market-specific regulatory status and availability. Please contact ALLPARA to confirm availability for your market.
Najważniejsze zalety: Revanesse Sculpt ™+
- Cross-linked hyaluronic acid 25 mg/mL with 0.3% lidocaine for injection comfort
- Indicated for medium to deep facial rhytides and for lipoatrophy
- Placed in the middle part of the dermis layer
- Implantation life averages 6 to 12 months
- Supplied as two 1.2 mL pre-filled syringes with up to two sterilised 27G needles
- BDDE cross-linked in phosphate-buffered saline
Wskazania i zastosowanie profesjonalne
Główne wskazania
- Medium to deep facial rhytides
- Lipoatrophy
Zastosowanie profesjonalne
For professional use. Revanesse Sculpt+ should only be injected by or under the direct supervision of qualified physicians trained in the proper injection technique for filling facial wrinkles, and is not for retail sale or self-administration. It is placed in the middle part of the dermis layer. The area must be thoroughly disinfected and injection performed under sterile conditions; bring the product to room temperature for 30 minutes beforehand, prime the syringe until a small drop appears at the needle tip, and inject slowly with the least pressure necessary. If the skin blanches, stop immediately and massage until normal colour returns. It must not be injected into an area already containing another filler or a permanent implant, never used for breast enlargement or implantation into bone, tendon, ligament or muscle, and must not contact quaternary ammonium salts such as benzalkonium chloride. Store between 2 and 25 degrees Celsius, protected from direct sunlight and freezing.
Obszary zabiegowe
- Face
Profil pacjenta
For adult patients seeking correction of medium to deep facial rhytides or of lipoatrophy, as assessed by a qualified physician. Contraindications include hypersensitivity to amide-type local anaesthetics, hypertrophic scarring, acne or other inflammatory skin disease, acute or chronic skin disease at or near the injection site, auto-immune disorders or immunotherapy, multiple severe allergies, coagulation defects or anti-coagulation therapy, sensitivity to hyaluronic acid, and unattainable expectations. It contains trace amounts of gram-positive bacterial proteins and is contraindicated in patients allergic to such material. It must not be used during pregnancy or lactation, in anyone under 18, or in conjunction with laser, intense pulsed light, chemical peeling or dermabrasion.
Jak działa Revanesse Sculpt ™+
Sculpt+ is a cross-linked hyaluronic acid gel that occupies volume in the dermis where it is placed, correcting medium to deep rhytides and the volume loss of lipoatrophy. Because it is placed in the middle part of the dermis rather than superficially, how long it lasts depends on the depth and location of the injection, which is why it lasts 6 to 12 months rather than a fixed period. The 0.3% lidocaine is present for injection comfort, which makes hypersensitivity to amide-type anaesthetics an outright contraindication.
Dlaczego warto zamawiać w Allpara
Allpara oferuje oryginalne, sprawdzone produkty REVANESSE z pełną identyfikowalnością partii, produktami z oznakowaniem CE, szybką dostawą na terenie całej UE i fachowym wsparciem posprzedażowym.
Najczęściej zadawane pytania
How long does Revanesse Sculpt+ last?
Revanesse Sculpt+ has an implantation life averaging 6 to 12 months, depending on the depth and location of the injection.
What should a practitioner do if the skin blanches during injection?
Stop the injection immediately and massage the area until the skin returns to its normal colour. Blanching can signal intravascular placement, which has been associated with embolisation, vision impairment, blindness, skin necrosis and stroke.