REVANESSE referências disponíveis na ALLPARA para uso profissional, de origem direta e certificadas em cada envio.
Revanesse Sculpt ™+
Revanesse Sculpt+ is a colourless, odourless and transparent aqueous gel of synthetic origin from Prollenium Medical Technologies in Aurora, Canada, developed for medium to deep facial rhytides and for lipoatrophy. Practitioners place it in the middle part of the dermis layer, where it offers an implantation life of 6 to 12 months on average. The product combines 25 mg/mL of BDDE cross-linked hyaluronic acid with 0.3% lidocaine in phosphate-buffered saline and is intended for professional use. Two 1.2 mL syringes come in each box, together with up to two sterilised 27G needles.
*Note: This product may have market-specific regulatory status and availability. Please contact ALLPARA to confirm availability for your market.
Principais vantagens de Revanesse Sculpt ™+
- Cross-linked hyaluronic acid 25 mg/mL with 0.3% lidocaine for injection comfort
- Indicated for medium to deep facial rhytides and for lipoatrophy
- Placed in the middle part of the dermis layer
- Implantation life averages 6 to 12 months
- Supplied as two 1.2 mL pre-filled syringes with up to two sterilised 27G needles
- BDDE cross-linked in phosphate-buffered saline
Indicações e utilização profissional
Principais indicações
- Medium to deep facial rhytides
- Lipoatrophy
Utilização profissional
For professional use. Revanesse Sculpt+ should only be injected by or under the direct supervision of qualified physicians trained in the proper injection technique for filling facial wrinkles, and is not for retail sale or self-administration. It is placed in the middle part of the dermis layer. The area must be thoroughly disinfected and injection performed under sterile conditions; bring the product to room temperature for 30 minutes beforehand, prime the syringe until a small drop appears at the needle tip, and inject slowly with the least pressure necessary. If the skin blanches, stop immediately and massage until normal colour returns. It must not be injected into an area already containing another filler or a permanent implant, never used for breast enlargement or implantation into bone, tendon, ligament or muscle, and must not contact quaternary ammonium salts such as benzalkonium chloride. Store between 2 and 25 degrees Celsius, protected from direct sunlight and freezing.
Zonas de tratamento
- Face
Perfil do paciente
For adult patients seeking correction of medium to deep facial rhytides or of lipoatrophy, as assessed by a qualified physician. Contraindications include hypersensitivity to amide-type local anaesthetics, hypertrophic scarring, acne or other inflammatory skin disease, acute or chronic skin disease at or near the injection site, auto-immune disorders or immunotherapy, multiple severe allergies, coagulation defects or anti-coagulation therapy, sensitivity to hyaluronic acid, and unattainable expectations. It contains trace amounts of gram-positive bacterial proteins and is contraindicated in patients allergic to such material. It must not be used during pregnancy or lactation, in anyone under 18, or in conjunction with laser, intense pulsed light, chemical peeling or dermabrasion.
Como funciona Revanesse Sculpt ™+
Sculpt+ is a cross-linked hyaluronic acid gel that occupies volume in the dermis where it is placed, correcting medium to deep rhytides and the volume loss of lipoatrophy. Because it is placed in the middle part of the dermis rather than superficially, how long it lasts depends on the depth and location of the injection, which is why it lasts 6 to 12 months rather than a fixed period. The 0.3% lidocaine is present for injection comfort, which makes hypersensitivity to amide-type anaesthetics an outright contraindication.
Porquê encomendar na Allpara
A Allpara oferece produtos REVANESSE originais e verificados de fornecedores selecionados, com rastreabilidade total dos lotes e apoio especializado. Servimos clínicas e profissionais de estética com produtos com certificação CE, entrega rápida em toda a UE a partir do nosso armazém na UE e preços profissionais competitivos. A nossa prioridade é a segurança, a satisfação e os resultados dos seus pacientes, com apoio pós-venda dedicado para a sua tranquilidade.
Perguntas frequentes
How long does Revanesse Sculpt+ last?
Revanesse Sculpt+ has an implantation life averaging 6 to 12 months, depending on the depth and location of the injection.
What should a practitioner do if the skin blanches during injection?
Stop the injection immediately and massage the area until the skin returns to its normal colour. Blanching can signal intravascular placement, which has been associated with embolisation, vision impairment, blindness, skin necrosis and stroke.
Mais de Prollenium Medical Technologies
Alternativas para a clínica
Retome onde ficou
Revanesse Sculpt ™+
Revanesse Sculpt+ is a colourless, odourless and transparent aqueous gel of synthetic origin from Prollenium Medical Technologies in Aurora, Canada, developed for medium to deep facial rhytides and for lipoatrophy. Practitioners place it in the middle part of the dermis layer, where it offers an implantation life of 6 to 12 months on average. The product combines 25 mg/mL of BDDE cross-linked hyaluronic acid with 0.3% lidocaine in phosphate-buffered saline and is intended for professional use. Two 1.2 mL syringes come in each box, together with up to two sterilised 27G needles.
*Note: This product may have market-specific regulatory status and availability. Please contact ALLPARA to confirm availability for your market.
Principais vantagens de Revanesse Sculpt ™+
- Cross-linked hyaluronic acid 25 mg/mL with 0.3% lidocaine for injection comfort
- Indicated for medium to deep facial rhytides and for lipoatrophy
- Placed in the middle part of the dermis layer
- Implantation life averages 6 to 12 months
- Supplied as two 1.2 mL pre-filled syringes with up to two sterilised 27G needles
- BDDE cross-linked in phosphate-buffered saline
Indicações e utilização profissional
Principais indicações
- Medium to deep facial rhytides
- Lipoatrophy
Utilização profissional
For professional use. Revanesse Sculpt+ should only be injected by or under the direct supervision of qualified physicians trained in the proper injection technique for filling facial wrinkles, and is not for retail sale or self-administration. It is placed in the middle part of the dermis layer. The area must be thoroughly disinfected and injection performed under sterile conditions; bring the product to room temperature for 30 minutes beforehand, prime the syringe until a small drop appears at the needle tip, and inject slowly with the least pressure necessary. If the skin blanches, stop immediately and massage until normal colour returns. It must not be injected into an area already containing another filler or a permanent implant, never used for breast enlargement or implantation into bone, tendon, ligament or muscle, and must not contact quaternary ammonium salts such as benzalkonium chloride. Store between 2 and 25 degrees Celsius, protected from direct sunlight and freezing.
Zonas de tratamento
- Face
Perfil do paciente
For adult patients seeking correction of medium to deep facial rhytides or of lipoatrophy, as assessed by a qualified physician. Contraindications include hypersensitivity to amide-type local anaesthetics, hypertrophic scarring, acne or other inflammatory skin disease, acute or chronic skin disease at or near the injection site, auto-immune disorders or immunotherapy, multiple severe allergies, coagulation defects or anti-coagulation therapy, sensitivity to hyaluronic acid, and unattainable expectations. It contains trace amounts of gram-positive bacterial proteins and is contraindicated in patients allergic to such material. It must not be used during pregnancy or lactation, in anyone under 18, or in conjunction with laser, intense pulsed light, chemical peeling or dermabrasion.
Como funciona Revanesse Sculpt ™+
Sculpt+ is a cross-linked hyaluronic acid gel that occupies volume in the dermis where it is placed, correcting medium to deep rhytides and the volume loss of lipoatrophy. Because it is placed in the middle part of the dermis rather than superficially, how long it lasts depends on the depth and location of the injection, which is why it lasts 6 to 12 months rather than a fixed period. The 0.3% lidocaine is present for injection comfort, which makes hypersensitivity to amide-type anaesthetics an outright contraindication.
Porquê encomendar na Allpara
A Allpara oferece produtos REVANESSE originais e verificados, com rastreabilidade total dos lotes, stock com certificação CE, entrega rápida em toda a UE e apoio pós-venda especializado.
Perguntas frequentes
How long does Revanesse Sculpt+ last?
Revanesse Sculpt+ has an implantation life averaging 6 to 12 months, depending on the depth and location of the injection.
What should a practitioner do if the skin blanches during injection?
Stop the injection immediately and massage the area until the skin returns to its normal colour. Blanching can signal intravascular placement, which has been associated with embolisation, vision impairment, blindness, skin necrosis and stroke.