Bỏ qua để đến Nội dung
· Tái tạo sinh học da
SKU 11012

Profhilo Structura

Còn hàng
Dung tích
1 x 2 mL
Nhà sản xuất
IBSA
Xuất xứ
Ý
Giá bán sỉ và lịch sử giá chỉ dành cho tài khoản đã xác minh
allpara cung cấp sản phẩm cho người hành nghề có giấy phép. Đăng nhập hoặc đăng ký tài khoản B2B để xem giá theo thời gian thực, các mức giá theo số lượng và lịch sử giá.

Profhilo Structura is a hyaluronic acid-based injectable device by IBSA, formulated to restore facial adipose tissue and support deep structural volume. It is intended for adult patients with mild to moderate facial volume loss, sagging cheeks or reduced facial projection. The product features IBSA's patented NAHYCO technology, which combines hyaluronic acid with a thermal stabilisation process free from chemical cross-linking agents, and is intended for professional use only.

Lợi ích chính của Profhilo Structura

  • Restores facial adipose (fat) tissue for a natural volumising and lifting effect
  • Provides deep structural support to the mid and lower face
  • Improves skin firmness and elasticity
  • Helps redefine and support facial contours
  • Stimulates the skin's natural regenerative processes
  • Formulated using IBSA's patented NAHYCO technology, free from chemical cross-linking agents
Thông tin chính
Thương hiệu PROFHILO
Nhà sản xuất IBSA
Xuất xứ Italy
Chứng nhận CE-marked medical device. For intradermal/subcutaneous professional use, on medical prescription.
Thành phần Hyaluronic acid sodium salt, high- and low-molecular-weight (45 mg + 45 mg per 2 mL; 22.5 mg + 22.5 mg per 1 mL, 4.5%), with sodium chloride, sodium phosphate and water for injection, stabilised by NAHYCO technology without chemical cross-linking.
Đóng gói 1 x 2 ml pre-filled syringe, sterile, single-use
Loại sử dụng Injectable hyaluronic acid-based medical device for facial bio-remodelling and structural support, professional use only
Kích thước kim Applied using either a needle or a cannula.
Độ sâu tiêm Intradermal or subcutaneous
Liệu trình / Thời gian Initial cycle of two sessions 30 days apart, if necessary followed by maintenance treatments approximately every four months.

Chỉ định và sử dụng chuyên môn

Chỉ định chính

  • Restoration of facial adipose (fat) tissue in adults with mild to moderate volume loss
  • Correction and filling of natural and induced cutaneous depressions of the face
  • Improvement of skin laxity and structural support of the mid and lower face
  • Redefinition of facial contours, including the jawline and cheek area
  • Dermal tissue repair, including in cases of acne scars

Sử dụng chuyên môn

Profhilo Structura is an injectable medical device intended for administration exclusively by qualified and appropriately trained medical professionals within a controlled clinical environment. It is supplied strictly for professional use and is not intended for retail sale to, or self-administration by, end consumers. It is administered by intradermal or subcutaneous injection and may be applied using either a needle or a cannula. Treatment planning, technique, and injection depth are determined by the treating practitioner following clinical assessment. It is a CE-marked medical device (notified body 0477), sold on medical prescription only.

Vùng điều trị

  • Midface and cheeks
  • Jawline
  • Areas of facial volume and adipose (fat) loss

Đối tượng bệnh nhân

Indicated for adult patients presenting with mild to moderate facial volume loss, sagging cheeks, or reduced facial projection, including age-related and weight-loss-associated fat loss. Patient selection, treatment planning, and injection depth are determined by the treating practitioner following clinical assessment. It must not be used in pregnant or breastfeeding women, in patients with autoimmune diseases, or in patients with known hypersensitivity or allergy to the components; the injection site must be healthy skin, free of inflammation, and it must not be injected intravascularly, into muscles or tendons, or used concurrently with laser resurfacing or medium-deep peeling.

Cơ chế hoạt động của Profhilo Structura ​

Profhilo Structura works through IBSA's patented NAHYCO technology, which combines high- and low-molecular-weight hyaluronic acid into a stable hybrid complex without chemical cross-linking agents. Administered intradermally or into the subcutaneous tissues, the product supports and helps restore the structural integrity of facial adipose tissue, stimulating the skin's natural regenerative processes. This differs from classic Profhilo, which is placed intradermally to hydrate and bio-remodel the skin's surface layers rather than the deeper fat compartment. The mechanism is designed to provide structural support and a natural, non-surgical lifting effect for the mid and lower face.

Vì sao nên đặt hàng tại Allpara

Allpara cung cấp sản phẩm PROFHILO chính hãng, đã được xác minh, từ các nhà cung cấp được tuyển chọn, với khả năng truy xuất lô đầy đủ và hỗ trợ chuyên môn. Chúng tôi phục vụ các phòng khám và chuyên gia thẩm mỹ với sản phẩm đạt chứng nhận CE, giao hàng nhanh khắp EU từ kho tại EU và giá chuyên nghiệp cạnh tranh. Ưu tiên của chúng tôi là sự an toàn, hài lòng và kết quả của bệnh nhân của bạn, cùng dịch vụ hậu mãi tận tâm để bạn hoàn toàn yên tâm.

Câu hỏi thường gặp

What's the difference between Profhilo and Profhilo Structura?

Profhilo hydrates and bio-remodels the skin's dermal layer, while Profhilo Structura is formulated to restore deeper adipose (fat) tissue and provide structural support to the mid and lower face. The two products target different tissue layers within the same brand range and are typically selected for different clinical goals.

How is Profhilo Structura administered?

It is administered by intradermal or subcutaneous injection, using either a needle or a cannula, by a qualified medical professional following an individual clinical assessment.

How many sessions of Profhilo Structura are typically needed?

The recommended protocol is an initial cycle of two sessions 30 days apart, if necessary followed by maintenance treatments, with the exact protocol determined by the treating practitioner based on individual assessment.

Thêm sản phẩm từ IBSA

Xem nhà sản xuất

Lựa chọn thay thế cho phòng khám

Tất cả sản phẩm

Profhilo Structura

Còn hàng
Đạt dấu CE Profhilo Structura
Giá chỉ dành cho tài khoản đã xác minh
Đăng nhập hoặc đăng ký tài khoản B2B để xem giá của bạn.
Đăng ký tài khoản B2B

Profhilo Structura is a hyaluronic acid-based injectable device by IBSA, formulated to restore facial adipose tissue and support deep structural volume. It is intended for adult patients with mild to moderate facial volume loss, sagging cheeks or reduced facial projection. The product features IBSA's patented NAHYCO technology, which combines hyaluronic acid with a thermal stabilisation process free from chemical cross-linking agents, and is intended for professional use only.

Lợi ích chính của Profhilo Structura

  • Restores facial adipose (fat) tissue for a natural volumising and lifting effect
  • Provides deep structural support to the mid and lower face
  • Improves skin firmness and elasticity
  • Helps redefine and support facial contours
  • Stimulates the skin's natural regenerative processes
  • Formulated using IBSA's patented NAHYCO technology, free from chemical cross-linking agents
Thông tin chính
Thương hiệu PROFHILO
Nhà sản xuất IBSA
Xuất xứ Italy
Chứng nhận CE-marked medical device. For intradermal/subcutaneous professional use, on medical prescription.
Thành phần Hyaluronic acid sodium salt, high- and low-molecular-weight (45 mg + 45 mg per 2 mL; 22.5 mg + 22.5 mg per 1 mL, 4.5%), with sodium chloride, sodium phosphate and water for injection, stabilised by NAHYCO technology without chemical cross-linking.
Đóng gói 1 x 2 ml pre-filled syringe, sterile, single-use
Loại sử dụng Injectable hyaluronic acid-based medical device for facial bio-remodelling and structural support, professional use only
Kích thước kim Applied using either a needle or a cannula.
Độ sâu tiêm Intradermal or subcutaneous
Liệu trình / Thời gian Initial cycle of two sessions 30 days apart, if necessary followed by maintenance treatments approximately every four months.

Chỉ định và sử dụng chuyên môn

Chỉ định chính

  • Restoration of facial adipose (fat) tissue in adults with mild to moderate volume loss
  • Correction and filling of natural and induced cutaneous depressions of the face
  • Improvement of skin laxity and structural support of the mid and lower face
  • Redefinition of facial contours, including the jawline and cheek area
  • Dermal tissue repair, including in cases of acne scars

Sử dụng chuyên môn

Profhilo Structura is an injectable medical device intended for administration exclusively by qualified and appropriately trained medical professionals within a controlled clinical environment. It is supplied strictly for professional use and is not intended for retail sale to, or self-administration by, end consumers. It is administered by intradermal or subcutaneous injection and may be applied using either a needle or a cannula. Treatment planning, technique, and injection depth are determined by the treating practitioner following clinical assessment. It is a CE-marked medical device (notified body 0477), sold on medical prescription only.

Vùng điều trị

  • Midface and cheeks
  • Jawline
  • Areas of facial volume and adipose (fat) loss

Đối tượng bệnh nhân

Indicated for adult patients presenting with mild to moderate facial volume loss, sagging cheeks, or reduced facial projection, including age-related and weight-loss-associated fat loss. Patient selection, treatment planning, and injection depth are determined by the treating practitioner following clinical assessment. It must not be used in pregnant or breastfeeding women, in patients with autoimmune diseases, or in patients with known hypersensitivity or allergy to the components; the injection site must be healthy skin, free of inflammation, and it must not be injected intravascularly, into muscles or tendons, or used concurrently with laser resurfacing or medium-deep peeling.

Cơ chế hoạt động của Profhilo Structura ​

Profhilo Structura works through IBSA's patented NAHYCO technology, which combines high- and low-molecular-weight hyaluronic acid into a stable hybrid complex without chemical cross-linking agents. Administered intradermally or into the subcutaneous tissues, the product supports and helps restore the structural integrity of facial adipose tissue, stimulating the skin's natural regenerative processes. This differs from classic Profhilo, which is placed intradermally to hydrate and bio-remodel the skin's surface layers rather than the deeper fat compartment. The mechanism is designed to provide structural support and a natural, non-surgical lifting effect for the mid and lower face.

Vì sao nên đặt hàng tại Allpara

Allpara cung cấp sản phẩm PROFHILO chính hãng, đã được xác minh, với khả năng truy xuất lô đầy đủ, hàng đạt chứng nhận CE, giao hàng nhanh khắp EU và hỗ trợ hậu mãi chuyên nghiệp.

Câu hỏi thường gặp

What's the difference between Profhilo and Profhilo Structura?

Profhilo hydrates and bio-remodels the skin's dermal layer, while Profhilo Structura is formulated to restore deeper adipose (fat) tissue and provide structural support to the mid and lower face. The two products target different tissue layers within the same brand range and are typically selected for different clinical goals.

How is Profhilo Structura administered?

It is administered by intradermal or subcutaneous injection, using either a needle or a cannula, by a qualified medical professional following an individual clinical assessment.

How many sessions of Profhilo Structura are typically needed?

The recommended protocol is an initial cycle of two sessions 30 days apart, if necessary followed by maintenance treatments, with the exact protocol determined by the treating practitioner based on individual assessment.

Thêm sản phẩm từ IBSA

Xem nhà sản xuất →
* Sản phẩm dùng cho chuyên môn. Bao bì có thể khác nhau tùy theo lô hoặc thị trường. Vui lòng tham khảo hướng dẫn sử dụng kèm theo để biết đầy đủ cách dùng và chống chỉ định.