Ir al contenido
· Biorrevitalización
SKU 11012

Profhilo Structura

En stock
Volumen
1 x 2 mL
Laboratorio
IBSA
Origen
Italia
Indicación
Facial adipose tissue restoration, structural volume support
Zonas de tratamiento
El precio profesional y su historial son solo para cuentas verificadas
allpara suministra a profesionales autorizados. Inicie sesión o solicite una cuenta B2B para ver los precios en tiempo real, los tramos por volumen y el historial de precios.

Profhilo Structura is a hyaluronic acid-based injectable device by IBSA, formulated to restore facial adipose tissue and support deep structural volume. It is intended for adult patients with mild to moderate facial volume loss, sagging cheeks or reduced facial projection. The product features IBSA's patented NAHYCO technology, which combines hyaluronic acid with a thermal stabilisation process free from chemical cross-linking agents, and is intended for professional use only.

Principales ventajas de Profhilo Structura

  • Restores facial adipose (fat) tissue for a natural volumising and lifting effect
  • Provides deep structural support to the mid and lower face
  • Improves skin firmness and elasticity
  • Helps redefine and support facial contours
  • Stimulates the skin's natural regenerative processes
  • Formulated using IBSA's patented NAHYCO technology, free from chemical cross-linking agents
Información clave
Marca PROFHILO
Fabricante IBSA
País de origen Italy
Certificación CE-marked medical device. For intradermal/subcutaneous professional use, on medical prescription.
Composición Hyaluronic acid sodium salt, high- and low-molecular-weight (45 mg + 45 mg per 2 mL; 22.5 mg + 22.5 mg per 1 mL, 4.5%), with sodium chloride, sodium phosphate and water for injection, stabilised by NAHYCO technology without chemical cross-linking.
Envase 1 x 2 ml pre-filled syringe, sterile, single-use
Tipo de uso Injectable hyaluronic acid-based medical device for facial bio-remodelling and structural support, professional use only
Tamaño de la aguja Applied using either a needle or a cannula.
Profundidad de inyección Intradermal or subcutaneous
Protocolo / Duración Initial cycle of two sessions 30 days apart, if necessary followed by maintenance treatments approximately every four months.

Indicaciones y uso profesional

Indicaciones principales

  • Restoration of facial adipose (fat) tissue in adults with mild to moderate volume loss
  • Correction and filling of natural and induced cutaneous depressions of the face
  • Improvement of skin laxity and structural support of the mid and lower face
  • Redefinition of facial contours, including the jawline and cheek area
  • Dermal tissue repair, including in cases of acne scars

Uso profesional

Profhilo Structura is an injectable medical device intended for administration exclusively by qualified and appropriately trained medical professionals within a controlled clinical environment. It is supplied strictly for professional use and is not intended for retail sale to, or self-administration by, end consumers. It is administered by intradermal or subcutaneous injection and may be applied using either a needle or a cannula. Treatment planning, technique, and injection depth are determined by the treating practitioner following clinical assessment. It is a CE-marked medical device (notified body 0477), sold on medical prescription only.

Zonas de tratamiento

  • Midface and cheeks
  • Jawline
  • Areas of facial volume and adipose (fat) loss

Perfil del paciente

Indicated for adult patients presenting with mild to moderate facial volume loss, sagging cheeks, or reduced facial projection, including age-related and weight-loss-associated fat loss. Patient selection, treatment planning, and injection depth are determined by the treating practitioner following clinical assessment. It must not be used in pregnant or breastfeeding women, in patients with autoimmune diseases, or in patients with known hypersensitivity or allergy to the components; the injection site must be healthy skin, free of inflammation, and it must not be injected intravascularly, into muscles or tendons, or used concurrently with laser resurfacing or medium-deep peeling.

Cómo funciona Profhilo Structura ​

Profhilo Structura works through IBSA's patented NAHYCO technology, which combines high- and low-molecular-weight hyaluronic acid into a stable hybrid complex without chemical cross-linking agents. Administered intradermally or into the subcutaneous tissues, the product supports and helps restore the structural integrity of facial adipose tissue, stimulating the skin's natural regenerative processes. This differs from classic Profhilo, which is placed intradermally to hydrate and bio-remodel the skin's surface layers rather than the deeper fat compartment. The mechanism is designed to provide structural support and a natural, non-surgical lifting effect for the mid and lower face.

Por qué comprar en Allpara

Allpara ofrece productos PROFHILO originales y verificados de proveedores seleccionados, con trazabilidad completa de lotes y asesoramiento experto. Atendemos a clínicas y profesionales de la estética con productos con certificado CE, entrega rápida en toda la UE desde nuestro almacén en la UE y precios profesionales competitivos. Nuestra prioridad es la seguridad, la satisfacción y los resultados de sus pacientes, con un servicio posventa dedicado para su tranquilidad.

Preguntas frecuentes

What's the difference between Profhilo and Profhilo Structura?

Profhilo hydrates and bio-remodels the skin's dermal layer, while Profhilo Structura is formulated to restore deeper adipose (fat) tissue and provide structural support to the mid and lower face. The two products target different tissue layers within the same brand range and are typically selected for different clinical goals.

How is Profhilo Structura administered?

It is administered by intradermal or subcutaneous injection, using either a needle or a cannula, by a qualified medical professional following an individual clinical assessment.

How many sessions of Profhilo Structura are typically needed?

The recommended protocol is an initial cycle of two sessions 30 days apart, if necessary followed by maintenance treatments, with the exact protocol determined by the treating practitioner based on individual assessment.

/ Especificaciones

La ficha técnica

Categoría
Biorrevitalización
Marca
PROFHILO
Laboratorio
IBSA
SKU
11012
Formato
1 x 2 mL
Origen
Italia
Indicación
Facial adipose tissue restoration, structural volume support
Uso
Injectable medical device, professional use
Zonas de tratamiento
/ Detalles del producto

El expediente completo

Profhilo Structura is a hyaluronic acid-based injectable device by IBSA, formulated to restore facial adipose tissue and support deep structural volume. It is intended for adult patients with mild to moderate facial volume loss, sagging cheeks or reduced facial projection. The product features IBSA's patented NAHYCO technology, which combines hyaluronic acid with a thermal stabilisation process free from chemical cross-linking agents, and is intended for professional use only.

IBSA, país de origen Italia.

Enviado a toda la UE desde nuestro almacén en la UE, con seguimiento y seguro, y envío en 24-72h. Cada unidad se envía con número de lote y fecha de caducidad, en depósito aduanero de la UE y con trazabilidad de lote.

Conservar según las especificaciones del fabricante, protegido de la luz directa. La cadena de frío solo se utiliza cuando el producto lo requiere.

Condiciones de pago a 30 / 60 / 90 días* disponibles para cuentas verificadas previa aprobación de crédito. Se admite la facturación en EUR, CHF y GBP.

Las condiciones son orientativas y se confirman tras la revisión de la cuenta.

What's the difference between Profhilo and Profhilo Structura?

Profhilo hydrates and bio-remodels the skin's dermal layer, while Profhilo Structura is formulated to restore deeper adipose (fat) tissue and provide structural support to the mid and lower face. The two products target different tissue layers within the same brand range and are typically selected for different clinical goals.

How is Profhilo Structura administered?

It is administered by intradermal or subcutaneous injection, using either a needle or a cannula, by a qualified medical professional following an individual clinical assessment.

How many sessions of Profhilo Structura are typically needed?

The recommended protocol is an initial cycle of two sessions 30 days apart, if necessary followed by maintenance treatments, with the exact protocol determined by the treating practitioner based on individual assessment.

/ Respuestas rápidas

Todo lo que un comprador pregunta primero

What's the difference between Profhilo and Profhilo Structura?
Profhilo hydrates and bio-remodels the skin's dermal layer, while Profhilo Structura is formulated to restore deeper adipose (fat) tissue and provide structural support to the mid and lower face. The two products target different tissue layers within the same brand range and are typically selected for different clinical goals.
How is Profhilo Structura administered?
It is administered by intradermal or subcutaneous injection, using either a needle or a cannula, by a qualified medical professional following an individual clinical assessment.
How many sessions of Profhilo Structura are typically needed?
The recommended protocol is an initial cycle of two sessions 30 days apart, if necessary followed by maintenance treatments, with the exact protocol determined by the treating practitioner based on individual assessment.
/ FAQ

Preguntas frecuentes

Profhilo hydrates and bio-remodels the skin's dermal layer, while Profhilo Structura is formulated to restore deeper adipose (fat) tissue and provide structural support to the mid and lower face. The two products target different tissue layers within the same brand range and are typically selected for different clinical goals.
It is administered by intradermal or subcutaneous injection, using either a needle or a cannula, by a qualified medical professional following an individual clinical assessment.
The recommended protocol is an initial cycle of two sessions 30 days apart, if necessary followed by maintenance treatments, with the exact protocol determined by the treating practitioner based on individual assessment.

Más productos de IBSA

Ver laboratorio

Alternativas para la clínica

Todos los productos

Profhilo Structura

En stock
Precios solo para cuentas verificadas
Inicie sesión o solicite una cuenta B2B para ver su precio.
Solicitar cuenta B2B

Profhilo Structura is a hyaluronic acid-based injectable device by IBSA, formulated to restore facial adipose tissue and support deep structural volume. It is intended for adult patients with mild to moderate facial volume loss, sagging cheeks or reduced facial projection. The product features IBSA's patented NAHYCO technology, which combines hyaluronic acid with a thermal stabilisation process free from chemical cross-linking agents, and is intended for professional use only.

Principales ventajas de Profhilo Structura

  • Restores facial adipose (fat) tissue for a natural volumising and lifting effect
  • Provides deep structural support to the mid and lower face
  • Improves skin firmness and elasticity
  • Helps redefine and support facial contours
  • Stimulates the skin's natural regenerative processes
  • Formulated using IBSA's patented NAHYCO technology, free from chemical cross-linking agents
Información clave
Marca PROFHILO
Fabricante IBSA
País de origen Italy
Certificación CE-marked medical device. For intradermal/subcutaneous professional use, on medical prescription.
Composición Hyaluronic acid sodium salt, high- and low-molecular-weight (45 mg + 45 mg per 2 mL; 22.5 mg + 22.5 mg per 1 mL, 4.5%), with sodium chloride, sodium phosphate and water for injection, stabilised by NAHYCO technology without chemical cross-linking.
Envase 1 x 2 ml pre-filled syringe, sterile, single-use
Tipo de uso Injectable hyaluronic acid-based medical device for facial bio-remodelling and structural support, professional use only
Tamaño de la aguja Applied using either a needle or a cannula.
Profundidad de inyección Intradermal or subcutaneous
Protocolo / Duración Initial cycle of two sessions 30 days apart, if necessary followed by maintenance treatments approximately every four months.

Indicaciones y uso profesional

Indicaciones principales

  • Restoration of facial adipose (fat) tissue in adults with mild to moderate volume loss
  • Correction and filling of natural and induced cutaneous depressions of the face
  • Improvement of skin laxity and structural support of the mid and lower face
  • Redefinition of facial contours, including the jawline and cheek area
  • Dermal tissue repair, including in cases of acne scars

Uso profesional

Profhilo Structura is an injectable medical device intended for administration exclusively by qualified and appropriately trained medical professionals within a controlled clinical environment. It is supplied strictly for professional use and is not intended for retail sale to, or self-administration by, end consumers. It is administered by intradermal or subcutaneous injection and may be applied using either a needle or a cannula. Treatment planning, technique, and injection depth are determined by the treating practitioner following clinical assessment. It is a CE-marked medical device (notified body 0477), sold on medical prescription only.

Zonas de tratamiento

  • Midface and cheeks
  • Jawline
  • Areas of facial volume and adipose (fat) loss

Perfil del paciente

Indicated for adult patients presenting with mild to moderate facial volume loss, sagging cheeks, or reduced facial projection, including age-related and weight-loss-associated fat loss. Patient selection, treatment planning, and injection depth are determined by the treating practitioner following clinical assessment. It must not be used in pregnant or breastfeeding women, in patients with autoimmune diseases, or in patients with known hypersensitivity or allergy to the components; the injection site must be healthy skin, free of inflammation, and it must not be injected intravascularly, into muscles or tendons, or used concurrently with laser resurfacing or medium-deep peeling.

Cómo funciona Profhilo Structura ​

Profhilo Structura works through IBSA's patented NAHYCO technology, which combines high- and low-molecular-weight hyaluronic acid into a stable hybrid complex without chemical cross-linking agents. Administered intradermally or into the subcutaneous tissues, the product supports and helps restore the structural integrity of facial adipose tissue, stimulating the skin's natural regenerative processes. This differs from classic Profhilo, which is placed intradermally to hydrate and bio-remodel the skin's surface layers rather than the deeper fat compartment. The mechanism is designed to provide structural support and a natural, non-surgical lifting effect for the mid and lower face.

Por qué comprar en Allpara

Allpara ofrece productos PROFHILO originales y verificados, con trazabilidad completa de lotes, stock con certificado CE, entrega rápida en toda la UE y servicio posventa experto.

Preguntas frecuentes

What's the difference between Profhilo and Profhilo Structura?

Profhilo hydrates and bio-remodels the skin's dermal layer, while Profhilo Structura is formulated to restore deeper adipose (fat) tissue and provide structural support to the mid and lower face. The two products target different tissue layers within the same brand range and are typically selected for different clinical goals.

How is Profhilo Structura administered?

It is administered by intradermal or subcutaneous injection, using either a needle or a cannula, by a qualified medical professional following an individual clinical assessment.

How many sessions of Profhilo Structura are typically needed?

The recommended protocol is an initial cycle of two sessions 30 days apart, if necessary followed by maintenance treatments, with the exact protocol determined by the treating practitioner based on individual assessment.

Más productos de IBSA

Ver el laboratorio →

Profhilo Structura is a hyaluronic acid-based injectable device by IBSA, formulated to restore facial adipose tissue and support deep structural volume. It is intended for adult patients with mild to moderate facial volume loss, sagging cheeks or reduced facial projection. The product features IBSA's patented NAHYCO technology, which combines hyaluronic acid with a thermal stabilisation process free from chemical cross-linking agents, and is intended for professional use only.

IBSA, país de origen Italia.

Enviado a toda la UE desde nuestro almacén en la UE, envío en 24-72h, con seguimiento y seguro. Cada unidad se envía con número de lote y fecha de caducidad, en depósito aduanero de la UE y con trazabilidad de lote. Conservar según las especificaciones del fabricante.

Pago a 30 / 60 / 90 días* para cuentas verificadas previa aprobación de crédito. Facturación en EUR, CHF y GBP.

What's the difference between Profhilo and Profhilo Structura?

Profhilo hydrates and bio-remodels the skin's dermal layer, while Profhilo Structura is formulated to restore deeper adipose (fat) tissue and provide structural support to the mid and lower face. The two products target different tissue layers within the same brand range and are typically selected for different clinical goals.

How is Profhilo Structura administered?

It is administered by intradermal or subcutaneous injection, using either a needle or a cannula, by a qualified medical professional following an individual clinical assessment.

How many sessions of Profhilo Structura are typically needed?

The recommended protocol is an initial cycle of two sessions 30 days apart, if necessary followed by maintenance treatments, with the exact protocol determined by the treating practitioner based on individual assessment.

* Producto de uso profesional. El envase puede variar según el lote o el mercado. Consulte las instrucciones de uso suministradas para las indicaciones completas y las contraindicaciones.