Viscoderm 0.8 is a sterile, single-use injectable hyaluronic acid medical device by IBSA, indicated to counteract slight xerodermia associated with dermatitis and/or psoriasis. It is intended for intradermal administration by qualified personnel. Its highly purified sodium hyaluronate is obtained by fermentation, is not chemically modified and has a molecular weight of approximately 1 million Dalton, close to that of endogenous hyaluronic acid. Each 1 ml pre-filled syringe contains 8 mg of it.
主要优势: Viscoderm 0.8
- Highly purified hyaluronic acid obtained by fermentation
- Not chemically modified
- Molecular weight of approximately 1 million Dalton
- Supports restoration of physiological hyaluronic acid levels in treated tissue
- Supports tissue rehydration
- Helps create favourable conditions for tissue remodelling
- Indicated for slight xerodermia associated with dermatitis and/or psoriasis
- High biocompatibility and excellent tolerability
- Sterile, pyrogen-free and single-use
适应症与专业用途
主要适应症
- Slight xerodermia associated with dermatitis and/or psoriasis
- Restoration of the normal physiological condition of the dermis
- Rehydration of skin tissue where cell turnover of the stratum corneum is increased
专业用途
Viscoderm 0.8 is a sterile, single-use medical device for intradermal use, to be sold on medical prescription only and administered by intradermal injection by qualified personnel only. It is injected at ambient temperature under strict aseptic conditions, intradermally at medium-deep level using a linear or picotage technique, with the 30G x 1/2 inch (0.3 x 12 mm) needle included in the kit. The recommended posology is an initial cycle of three treatment sessions at one-week intervals, possibly followed by monthly maintenance sessions. Do not inject intravascularly, into the muscles or tendons, or for breast enlargement. Do not mix with other products, and do not mix with disinfectants such as quaternary ammonium salts or chlorhexidine, as a precipitate may form. The content of the pre-filled syringe is sterile and the outer surface of the syringe is not; do not use after the expiry date or if the packaging is open or damaged. Do not re-sterilise and do not reuse. Once opened, use immediately and discard after use.
治疗部位
- Intradermal administration, at medium-deep level
- The treating practitioner determines the area treated
适用患者
Viscoderm 0.8 is indicated for adults of both sexes. The device restores the normal physiological condition of the dermis in cases of xerodermia related to dermatitis and/or psoriasis, and the 0.8% concentration is indicated to counteract slight xerodermia. Suitability is determined by the treating practitioner. The injection site must be on healthy skin. It must not be used in pregnant or breast-feeding women, in patients with autoimmune diseases, or in cases of known hypersensitivity or allergy to the components of the product. It must not be used in conjunction with treatments such as laser resurfacing and medium-deep peeling, and must not be injected into areas where inflammatory processes are present.
作用原理: Viscoderm 0.8
Viscoderm 0.8 delivers highly purified sodium hyaluronate, obtained by fermentation and not subjected to chemical modification processes, directly into the dermis. The viscoelastic and moisturising properties of hyaluronic acid, combined with the possibility of maintaining it at adequate levels in the skin tissues, rehydrate the tissues and create the optimal conditions to prevent and combat the process of dry skin, favouring tissue remodelling. Intradermal administration restores the physiological quantity of hyaluronic acid in the treated tissues. At a molecular weight of about 1 million Dalton, very close to the natural molecular weight of endogenous hyaluronic acid, the product is totally biocompatible. The 0.8% concentration is the lowest of the three in the range and is the one indicated for slight xerodermia.
为什么选择在 Allpara 订购
Allpara 提供正品、经过验证的 VISCODERM 产品,来自经过严格审核的供应商,具备完整的批次可追溯性和专家支持。我们为诊所和医美专业人士提供CE认证产品、从欧盟仓库快速配送至欧盟各地,以及具有竞争力的专业价格。我们关注的是您患者的安全、满意度和效果,并提供专属售后支持,让您安心无忧。
常见问题
How does Viscoderm 0.8 differ from Viscoderm 1.6 and 2.0?
The three concentrations share one intended use and differ by the degree of xerodermia they address. Viscoderm 0.8 (8 mg/1 ml) is indicated to counteract slight xerodermia, Viscoderm 1.6 (24 mg/1.5 ml) moderate xerodermia, and Viscoderm 2.0 (20 mg/1 ml) severe xerodermia.
Is the hyaluronic acid in Viscoderm 0.8 chemically modified?
No. The hyaluronic acid is obtained by fermentation and has not undergone chemical modification processes, which results in excellent tolerability. It is highly purified, with a molecular weight of about 1 million Dalton, very close to that of endogenous hyaluronic acid, making the product totally biocompatible.
Who should not be treated with Viscoderm 0.8?
Viscoderm 0.8 must not be used in conjunction with treatments such as laser resurfacing and medium-deep peeling. It must also not be used in pregnant or breast-feeding women, in patients with autoimmune diseases, or in cases of known hypersensitivity or allergy to the components, and the injection site must be on healthy skin and free of inflammatory processes.
更多产品: IBSA
诊所替代选择
继续浏览
Viscoderm 0.8 is a sterile, single-use injectable hyaluronic acid medical device by IBSA, indicated to counteract slight xerodermia associated with dermatitis and/or psoriasis. It is intended for intradermal administration by qualified personnel. Its highly purified sodium hyaluronate is obtained by fermentation, is not chemically modified and has a molecular weight of approximately 1 million Dalton, close to that of endogenous hyaluronic acid. Each 1 ml pre-filled syringe contains 8 mg of it.
主要优势: Viscoderm 0.8
- Highly purified hyaluronic acid obtained by fermentation
- Not chemically modified
- Molecular weight of approximately 1 million Dalton
- Supports restoration of physiological hyaluronic acid levels in treated tissue
- Supports tissue rehydration
- Helps create favourable conditions for tissue remodelling
- Indicated for slight xerodermia associated with dermatitis and/or psoriasis
- High biocompatibility and excellent tolerability
- Sterile, pyrogen-free and single-use
适应症与专业用途
主要适应症
- Slight xerodermia associated with dermatitis and/or psoriasis
- Restoration of the normal physiological condition of the dermis
- Rehydration of skin tissue where cell turnover of the stratum corneum is increased
专业用途
Viscoderm 0.8 is a sterile, single-use medical device for intradermal use, to be sold on medical prescription only and administered by intradermal injection by qualified personnel only. It is injected at ambient temperature under strict aseptic conditions, intradermally at medium-deep level using a linear or picotage technique, with the 30G x 1/2 inch (0.3 x 12 mm) needle included in the kit. The recommended posology is an initial cycle of three treatment sessions at one-week intervals, possibly followed by monthly maintenance sessions. Do not inject intravascularly, into the muscles or tendons, or for breast enlargement. Do not mix with other products, and do not mix with disinfectants such as quaternary ammonium salts or chlorhexidine, as a precipitate may form. The content of the pre-filled syringe is sterile and the outer surface of the syringe is not; do not use after the expiry date or if the packaging is open or damaged. Do not re-sterilise and do not reuse. Once opened, use immediately and discard after use.
治疗部位
- Intradermal administration, at medium-deep level
- The treating practitioner determines the area treated
适用患者
Viscoderm 0.8 is indicated for adults of both sexes. The device restores the normal physiological condition of the dermis in cases of xerodermia related to dermatitis and/or psoriasis, and the 0.8% concentration is indicated to counteract slight xerodermia. Suitability is determined by the treating practitioner. The injection site must be on healthy skin. It must not be used in pregnant or breast-feeding women, in patients with autoimmune diseases, or in cases of known hypersensitivity or allergy to the components of the product. It must not be used in conjunction with treatments such as laser resurfacing and medium-deep peeling, and must not be injected into areas where inflammatory processes are present.
作用原理: Viscoderm 0.8
Viscoderm 0.8 delivers highly purified sodium hyaluronate, obtained by fermentation and not subjected to chemical modification processes, directly into the dermis. The viscoelastic and moisturising properties of hyaluronic acid, combined with the possibility of maintaining it at adequate levels in the skin tissues, rehydrate the tissues and create the optimal conditions to prevent and combat the process of dry skin, favouring tissue remodelling. Intradermal administration restores the physiological quantity of hyaluronic acid in the treated tissues. At a molecular weight of about 1 million Dalton, very close to the natural molecular weight of endogenous hyaluronic acid, the product is totally biocompatible. The 0.8% concentration is the lowest of the three in the range and is the one indicated for slight xerodermia.
为什么选择在 Allpara 订购
Allpara 提供正品、经过验证的 VISCODERM 产品,具备完整的批次可追溯性、CE认证库存、欧盟范围内快速配送以及专业的售后支持。
常见问题
How does Viscoderm 0.8 differ from Viscoderm 1.6 and 2.0?
The three concentrations share one intended use and differ by the degree of xerodermia they address. Viscoderm 0.8 (8 mg/1 ml) is indicated to counteract slight xerodermia, Viscoderm 1.6 (24 mg/1.5 ml) moderate xerodermia, and Viscoderm 2.0 (20 mg/1 ml) severe xerodermia.
Is the hyaluronic acid in Viscoderm 0.8 chemically modified?
No. The hyaluronic acid is obtained by fermentation and has not undergone chemical modification processes, which results in excellent tolerability. It is highly purified, with a molecular weight of about 1 million Dalton, very close to that of endogenous hyaluronic acid, making the product totally biocompatible.
Who should not be treated with Viscoderm 0.8?
Viscoderm 0.8 must not be used in conjunction with treatments such as laser resurfacing and medium-deep peeling. It must also not be used in pregnant or breast-feeding women, in patients with autoimmune diseases, or in cases of known hypersensitivity or allergy to the components, and the injection site must be on healthy skin and free of inflammatory processes.