CE认证
皮肤填充剂
Perfectha Finelines Lidocaine is a cross-linked hyaluronic acid dermal filler with anaesthetic, indicated for superficial facial lines and skin depressions. It is a fine gel for intradermal placement that addresses periorbital fine lines and peribuccal fine lines, and tear troughs through injection into the supraperiosteal plane, at approximately 180,000 particles per mL with the lowest volumising capacity of the four variants. The filler contains 0.30% (w/w) lidocaine hydrochloride, added during the manufacture of the bulk gel to reduce pain during and after treatment, and BDDE is non-detectable at under 2 ppm in the finished gel. Perfectha uses E-BRID Technology to slow enzymatic degradation, has been CE marked since 2007 under CE 2195, has a 2-year shelf life and can be reversed with hyaluronidase. It is intended for professional use.
主要优势： Perfectha Finelines Lidocaine
- For superficial facial lines and skin depressions
- Contains 0.30% (w/w) lidocaine hydrochloride for a more comfortable treatment
- Identical to the original Perfectha Finelines apart from the lidocaine
- A fine gel in the Perfectha range, for delicate correction
- Approximately 180,000 particles per mL, the smallest particle size in the range
- Cross-linked hyaluronic acid 20 mg/mL, non-animal origin
- E-BRID Technology, for slower enzymatic degradation and longer-lasting results
- HA Polymer Solution Network for a smooth, low-force injection
- Supplied as a single 1.0 mL syringe with two 30G x 13 mm needles
- CE-marked medical device, CE 2195
适应症与专业用途
主要适应症
- Superficial facial lines and skin depressions
- Periorbital fine lines
- Peribuccal fine lines
- Tear troughs, by injection into the supraperiosteal plane
专业用途
Perfectha Finelines Lidocaine is a cross-linked hyaluronic acid dermal filler with 0.30% (w/w) lidocaine hydrochloride from Sinclair, for intradermal placement in superficial facial lines and skin depressions. It is a fine gel, at approximately 180,000 particles per mL with the lowest volumising capacity of the four variants, so it is suited to delicate superficial correction rather than volume. Tear troughs are treated by injection into the supraperiosteal plane. The injection technique is unchanged from the original Perfectha, and the product is not suitable for pregnant or breastfeeding patients or patients allergic to lidocaine.
治疗部位
- Periorbital area
- Peribuccal area
- Tear troughs
适用患者
Patient suitability must be determined by the treating practitioner following clinical assessment and according to the contraindications. Pregnant and breastfeeding patients and patients allergic to lidocaine are excluded. Patients seeking volume or contour rather than correction of superficial lines are better served by Perfectha Deep or Perfectha Subskin.
作用原理： Perfectha Finelines Lidocaine
Perfectha Finelines Lidocaine works through cross-linked hyaluronic acid of non-animal origin at 20 mg/mL in phosphate-buffered saline, placed intradermally, with 0.30% (w/w) lidocaine hydrochloride added at the bulk-gel formulation stage to reduce discomfort during and after treatment. What separates it from the rest of the range is particle size: at approximately 180,000 particles per mL it has the smallest particles and the lowest volumising capacity of the four Perfectha variants, which is what suits it to delicate superficial work rather than volume. The gel is built with Sinclair's E-BRID Technology, which creates a higher number of covalent bonds to help minimise the effects of hyaluronidase and oxidation in the body, slowing enzymatic degradation. An added HA Polymer Solution Network forms a protective fluid environment around the microgel particles and acts as a lubricant so the gel injects smoothly at low extrusion force.
为什么选择在 Allpara 订购
Allpara 提供正品、经过验证的 PERFECTHA 产品，来自经过严格审核的供应商，具备完整的批次可追溯性和专家支持。我们为诊所和医美专业人士提供CE认证产品、从欧盟仓库快速配送至欧盟各地，以及具有竞争力的专业价格。我们关注的是您患者的安全、满意度和效果，并提供专属售后支持，让您安心无忧。
常见问题
What is Perfectha Finelines Lidocaine used for?
Superficial facial lines and skin depressions, including periorbital fine lines and peribuccal fine lines, and tear troughs by injection into the supraperiosteal plane.
How much lidocaine does it contain, and what difference does it make?
0.30% (w/w) lidocaine hydrochloride, added during manufacture of the bulk gel rather than mixed at the point of treatment. There is no other difference from the original Perfectha Finelines, and it is injected using the same technique.
How does it differ from the other Perfectha variants?
By particle size, which is what differentiates the gels: the bigger the particles, the greater the volumising effect and the longer-lasting the result. Perfectha Finelines Lidocaine has the smallest particles at around 180,000 per mL and the lowest volumising capacity; then Perfectha Derm at 90,000, Perfectha Deep at 8,000, and Perfectha Subskin at 2,000 with the highest volumising capacity.
更多产品： Sinclair
针头、钝针与埋线
诊所替代选择
/ 最近浏览
继续浏览
Perfectha Finelines Lidocaine is a cross-linked hyaluronic acid dermal filler with anaesthetic, indicated for superficial facial lines and skin depressions. It is a fine gel for intradermal placement that addresses periorbital fine lines and peribuccal fine lines, and tear troughs through injection into the supraperiosteal plane, at approximately 180,000 particles per mL with the lowest volumising capacity of the four variants. The filler contains 0.30% (w/w) lidocaine hydrochloride, added during the manufacture of the bulk gel to reduce pain during and after treatment, and BDDE is non-detectable at under 2 ppm in the finished gel. Perfectha uses E-BRID Technology to slow enzymatic degradation, has been CE marked since 2007 under CE 2195, has a 2-year shelf life and can be reversed with hyaluronidase. It is intended for professional use.
主要优势： Perfectha Finelines Lidocaine
- For superficial facial lines and skin depressions
- Contains 0.30% (w/w) lidocaine hydrochloride for a more comfortable treatment
- Identical to the original Perfectha Finelines apart from the lidocaine
- A fine gel in the Perfectha range, for delicate correction
- Approximately 180,000 particles per mL, the smallest particle size in the range
- Cross-linked hyaluronic acid 20 mg/mL, non-animal origin
- E-BRID Technology, for slower enzymatic degradation and longer-lasting results
- HA Polymer Solution Network for a smooth, low-force injection
- Supplied as a single 1.0 mL syringe with two 30G x 13 mm needles
- CE-marked medical device, CE 2195
适应症与专业用途
主要适应症
- Superficial facial lines and skin depressions
- Periorbital fine lines
- Peribuccal fine lines
- Tear troughs, by injection into the supraperiosteal plane
专业用途
Perfectha Finelines Lidocaine is a cross-linked hyaluronic acid dermal filler with 0.30% (w/w) lidocaine hydrochloride from Sinclair, for intradermal placement in superficial facial lines and skin depressions. It is a fine gel, at approximately 180,000 particles per mL with the lowest volumising capacity of the four variants, so it is suited to delicate superficial correction rather than volume. Tear troughs are treated by injection into the supraperiosteal plane. The injection technique is unchanged from the original Perfectha, and the product is not suitable for pregnant or breastfeeding patients or patients allergic to lidocaine.
治疗部位
- Periorbital area
- Peribuccal area
- Tear troughs
适用患者
Patient suitability must be determined by the treating practitioner following clinical assessment and according to the contraindications. Pregnant and breastfeeding patients and patients allergic to lidocaine are excluded. Patients seeking volume or contour rather than correction of superficial lines are better served by Perfectha Deep or Perfectha Subskin.
作用原理： Perfectha Finelines Lidocaine
Perfectha Finelines Lidocaine works through cross-linked hyaluronic acid of non-animal origin at 20 mg/mL in phosphate-buffered saline, placed intradermally, with 0.30% (w/w) lidocaine hydrochloride added at the bulk-gel formulation stage to reduce discomfort during and after treatment. What separates it from the rest of the range is particle size: at approximately 180,000 particles per mL it has the smallest particles and the lowest volumising capacity of the four Perfectha variants, which is what suits it to delicate superficial work rather than volume. The gel is built with Sinclair's E-BRID Technology, which creates a higher number of covalent bonds to help minimise the effects of hyaluronidase and oxidation in the body, slowing enzymatic degradation. An added HA Polymer Solution Network forms a protective fluid environment around the microgel particles and acts as a lubricant so the gel injects smoothly at low extrusion force.
为什么选择在 Allpara 订购
Allpara 提供正品、经过验证的 PERFECTHA 产品，具备完整的批次可追溯性、CE认证库存、欧盟范围内快速配送以及专业的售后支持。
常见问题
What is Perfectha Finelines Lidocaine used for?
Superficial facial lines and skin depressions, including periorbital fine lines and peribuccal fine lines, and tear troughs by injection into the supraperiosteal plane.
How much lidocaine does it contain, and what difference does it make?
0.30% (w/w) lidocaine hydrochloride, added during manufacture of the bulk gel rather than mixed at the point of treatment. There is no other difference from the original Perfectha Finelines, and it is injected using the same technique.
How does it differ from the other Perfectha variants?
By particle size, which is what differentiates the gels: the bigger the particles, the greater the volumising effect and the longer-lasting the result. Perfectha Finelines Lidocaine has the smallest particles at around 180,000 per mL and the lowest volumising capacity; then Perfectha Derm at 90,000, Perfectha Deep at 8,000, and Perfectha Subskin at 2,000 with the highest volumising capacity.
更多产品： Sinclair
查看制造商 →* 专业用途产品。包装可能因批次或市场而异。完整的使用说明和禁忌症请参阅随附的使用说明书。